Does anyone know where I could buy new Dust Boots for the upper Ball Joint on a 2004 Liberty. I tore one while changing front springs and have replaced Upper arm complete. Would be nice to get replacement boot to keep arm as spare. thanks barryh
Failed T Piece PCV System
I replaced the broken T by cutting the plastic pipes and replacing with a brass T of 5/8''(from an underground irrigation sytem) and buying in a length of thin walled silicon hose from a supplier in England. The hose has good temp characteristics and makes a tight fit...
I can not pull up the picture of the clip that you want so I am in the dark. However I buy all of the various clip styles at any of the bearing shops-- where you would go for wheel bearings or similar. Cannot offer names as I am in Australia--see how you go
Changed the oil on the NP242J Transfer Case and found that there was a lot of gritty bronze in the old oil. I have had no problems with using the case and there are no strange noises. It does stick in 4WD part time sometimes when changing back to 2WD but I get around that by backing up to get it...
Can anyone who has experience with removing the front bumper(plastic cover) describe the clips which can be reached through the flap at the front of the mudguard liner. There are only 2--one each side and the location is above the fog light and below the turning light. I have been trying to find...
I am going to do a small lift to the front of my 2004 KJ(3.7 Petrol) by using Mopar CRD springs. I have the Parts list that applies to my model but I cannot interpret which spring from the list applies to the Diesel. I understand that there were 2.5 and 2.8 diesels around my year and that they...
crd springs on KJ
Question for Bandit Steve
Did you replace the springs with new mopar CRD? and second question. Did you replace the shocks at same time. I was wondering whether your std shocks were coping with extra load. barryh
Changing the front seal is easy if you have the tools. firstly you need to remove the front drive shaft which is held by 6 x8mm bolts with 8mm head size-- need good quality socket especially if some fool has loctited threads.Second problem is to hold shaft while you break loose the bolts-- I...
nut for clutch fan
I am surprised to see that your 36mm spanner would not fit the shaft on your clutch fan. I recently ground up an old spanner from a junk shop reducing the width and opening the jaws to exactly 36mm, and this is an exact fit to the nut--puzzle for me. barryh
Leaking KJ front Diff
As far as I can see the main reason for leaks from the front diff are hits(on raised rocks etc) that spring the silicone joint on the cover. The best practical way to fix is to get out the angle grinder and cut through the1/2"(it may be 12mm) bolt that holds the front...
Does anyone happen to know the part number for a front pinion seal(front input shaft). The parts list I have seems to be a dead end and I would like to have the part on hand before I pull the old one. Thanks barryh
2004 KJ Limited
Thanks for the prompt replies to my query on battery. Surprised to find that the position is the same but nice to be able to buy the US version at about 10% of the Aust price. barryh
Hi
can someone tell me whether the battery on the US model 3.7L is on the left side. I am in Australia and have the r/h drive model and the battery is on the left. The part No for both models appears to me to be the same, but I do not want to order from US if they are different. thanks in...
Managed to hit a kangaroo with my KJ Liberty and pulled a hole about 3/4'' with a crack about 3'' long in the bumper. I have ordered a plastic welding heat gun from e-bay and I will have a go at welding the crack. Does anyone know the type of plastic used in the bumper(I think it is ABS) as it...
Kj Liberty seats
Hi Signaleer
I have a 2004 limited which has leather seats that are in as good as new condition. I also find that the seating is not very comfortable, and as you suggest I feel that the seat is too short. I am about 6ft and around 14st but I must admit that I have difficulty...
HD Cooling fan Kj Liberty
The additional fan for the Tow Kit is a conventional Clutch-Fan that screwsto thefront of the Water Pump shaft. The regulation or coupling effect for this type of fan is controlled by the temp of the air flow through the radiator. If the temp is low the fan just slips...
I have a 2004 KJ Liberty and have so far been unsuccessful in finding out the Paint color/code location. Does anyone know where this info is usually placed on the car. thanks barryh
Thanks for all of the replies on the characteristics of the trans. I see the indications that there are problems with reverse, but I think mine is worse than some of the symptoms described.
I am going today to have a Repair shop have a look at it, so i will know a lot more about what is going...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.