Lift pics and spec thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
I really like this idea. I'm not above doing my own research, but I was seriously considering RRO until I ended up hear and starting reading everything. It's been might helpful to know where I should and shouldn't go, and what risk I'll be taking if I choose to ignore everyone's advice.

RRO is good for one thing, well two bad products and bad advice. I mean they say they are experts but then try to sell you a kit that they say you need to align your KJ when lifted. There isn't a kit needed nor can you even use what they try and sell you. :happy175:
 

zuperzaindi

Full Access Member
Joined
Mar 20, 2015
Messages
31
Reaction score
0
Location
Colorado Springs
RRO is good for one thing, well two bad products and bad advice. I mean they say they are experts but then try to sell you a kit that they say you need to align your KJ when lifted. There isn't a kit needed nor can you even use what they try and sell you. :happy175:

Yeah, their kits sounded good -in theory-. But you guys definitely convinced me that it is well worth the money to invest in more expensive, but way better, products.
 

Bsletten3

New Member
Joined
May 22, 2015
Messages
4
Reaction score
0
Location
Snoqualmie
In progress

It's coming along. Next is paint front matt black
 

Attachments

  • image.jpg
    image.jpg
    98 KB · Views: 195

greene

Full Access Member
Joined
Jan 31, 2013
Messages
38
Reaction score
5
Location
Texas
Front: JBA lifted A-arms, strut top plate H&R springs on 1/4” clevis, Bilstein 4600 struts = 22” lift
Rear: H&R springs on 1 additional spring pads top, Bilstein 4600 shocks = 21.5” lift
Soon to have 265/70r16 or 265/75r16?
 

Attachments

  • edited_FB_IMG_1454283734962.jpg
    edited_FB_IMG_1454283734962.jpg
    84.4 KB · Views: 189

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Front: JBA lifted A-arms, strut top plate H&R springs on 1/4” clevis, Bilstein 4600 struts = 22” lift
Rear: H&R springs on 1 additional spring pads top, Bilstein 4600 shocks = 21.5” lift
Soon to have 265/70r16 or 265/75r16?

Looks good like I said on Fakebook, but 265-75-16s are going to require at least 4.10s 265-70-16s even take a hit on power and mileage , reason for me to go 4.10s on my next build with the 265-70s
 

dude1116

Full Access Member
Joined
May 31, 2011
Messages
3,373
Reaction score
13
Location
Pompton Plains, NJ
Looks good like I said on Fakebook, but 265-75-16s are going to require at least 4.10s 265-70-16s even take a hit on power and mileage , reason for me to go 4.10s on my next build with the 265-70s

Quite a hit. Can't get more than 16.5mpgs now. Of course...it's winter now too.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Quite a hit. Can't get more than 16.5mpgs now. Of course...it's winter now too.

Winter ***** big time but my 04 on the road always gets 21-22 mpg easily in the summer, winter goes down 2-3 mpg .
Another reason I'm going 265-70s with 4.10s need more poooooowwwweeerrr! :happy175:
 

95whtzr2

Full Access Member
Joined
Sep 27, 2013
Messages
28
Reaction score
0
Location
Georgetown, Tx
2003 liberty sport 3.7L/auto
18" all 4 corners before lift, 21" all 4 after lift.

235/70/16 Michelin street tires with 60% tread.

Front
ARB2927 OME 927 springs
ARB90009 OME sport struts

Rear
ARB2948 OME 948 springs
ARB60069 OME sport shocks

Everything else is stock.

Pics are pre-alignment:
You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

mx3_ryder

Full Access Member
Joined
Jan 27, 2014
Messages
351
Reaction score
1
Location
troy VT
Front: JBA lifted A-arms, strut top plate H&R springs on 1/4” clevis, Bilstein 4600 struts = 22” lift
Rear: H&R springs on 1 additional spring pads top, Bilstein 4600 shocks = 21.5” lift
Soon to have 265/70r16 or 265/75r16?

Looks good... Had no idea H&R made raising springs. What are the spring rates?
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Front: JBA lifted A-arms, strut top plate H&R springs on 1/4” clevis, Bilstein 4600 struts = 22” lift
Rear: H&R springs on 1 additional spring pads top, Bilstein 4600 shocks = 21.5” lift
Soon to have 265/70r16 or 265/75r16?

At only 22 inches 265-75-16s are going to be way tight in the fenderwells . Need to be at another inch in height really to run that size, so sticking with 265-70s would be much better
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Looks good... Had no idea H&R made raising springs. What are the spring rates?

Can't remember and can't find where I wrote them down used to ahve them. They don't give as much lift as 927s do. with just springs you get about 19.75 to 21 at most ( without top plate/ clevis etc)
 

Docnoisewater

New Member
Joined
Sep 15, 2012
Messages
16
Reaction score
1
Location
Brunswick, GA
Finally got the lift done. Couldn't be happier with the results.

Ordered all parts from JBA (UCA, front coilovers, rear springs, bilsteins)

docnoisewater-albums-06-sport-lifted-picture6065-amelia-island-fernandina-beach-fl.jpg
 

TwoBobsKJ

Full Access Member
Joined
Jan 28, 2011
Messages
2,637
Reaction score
17
Location
Northern Ohio
Finally got the lift done. Couldn't be happier with the results.

Ordered all parts from JBA (UCA, front coilovers, rear springs, bilsteins)

docnoisewater-albums-06-sport-lifted-picture6065-amelia-island-fernandina-beach-fl.jpg

Looks great!

Did you get the JBA coilovers or OME or Ironman for the front? Which rear springs?

Keep us posted on the ride, your thoughts on the install, etc. :waytogo:

Bob
 

Docnoisewater

New Member
Joined
Sep 15, 2012
Messages
16
Reaction score
1
Location
Brunswick, GA
I ordered the silver package from jba
Came with the jba uca coilovers and rearsprings. Also teraflex bumpstops and bilstein shocks.

Install for me was....interesting is the nice way of putting it. It comes with detailed instructions that are helpful. I had plenty of help from friends that are very skills wrench turners. But alot of rust issues from the years of salty roads in the dc metro area. I think if I didn't have additional issues along the way it should of only taken us 5 hours.

The ride went from probably a 2 to a 10.
The change is so noticeable that my wife, who drives it everyday, actually made comments.

There is a local shop I trust that did the alignment after install and had them look over the work. The owner has a liberty and really went over it throughly because he is shopping for a lift!
 

ozone000

Member
Joined
Mar 17, 2016
Messages
80
Reaction score
0
Location
San Diego
So the only thing I replaced was the springs with OME 927/948 and shocks with Bilsteins. Since I haven't seen too many pics with this setup on a Limited with stock 235/65R17s I thought I'd post mine.


On the first pic is a "before" with the rear stuffed a bit. I didn't take a driveway pic of the before.


I measure 21.25 all the way around, but I didn't renew the isolators at all.
 

Attachments

  • IMAG0126.jpg
    IMAG0126.jpg
    93.4 KB · Views: 169
  • IMAG0157.jpg
    IMAG0157.jpg
    98.4 KB · Views: 195
  • IMAG0161.jpg
    IMAG0161.jpg
    98.8 KB · Views: 165

TwoBobsKJ

Full Access Member
Joined
Jan 28, 2011
Messages
2,637
Reaction score
17
Location
Northern Ohio
So the only thing I replaced was the springs with OME 927/948 and shocks with Bilsteins. Since I haven't seen too many pics with this setup on a Limited with stock 235/65R17s I thought I'd post mine.


On the first pic is a "before" with the rear stuffed a bit. I didn't take a driveway pic of the before.


I measure 21.25 all the way around, but I didn't renew the isolators at all.

Looks really good! :waytogo:

That setup with the stock size tires looks ideal. What do you think of the ride? Has it been aligned yet?

Bob
 

ozone000

Member
Joined
Mar 17, 2016
Messages
80
Reaction score
0
Location
San Diego
I agree with the tires, I think its the 17" wheels that make the difference. Either that or the fact that I overexposed the photo a bit to allow for a better image of the tire inside the wheel well, making it look bigger.


It has been aligned as it was nearly undriveable, but it will need another alignment with the proper instructions for the guy. He was totally focused on getting the caster right first. Came back here to do a search and found that caster is nearly impossible to get in spec with a lift like mine.


Right now it drives great, but as I said in the other thread I feel it's a bit unstable when hitting the high speed dips that are common to San Diego freeways. However, I'm used to driving a BMW and a sportbike, so it may just be a high bar of expectation for a Jeep with a higher COG than normal.


Personally, I would like even stiffer springs and appropriately valved shocks, but again...BMW...sportbike.
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
39
Location
Somewhere between being sane and insane!
I agree with the tires, I think its the 17" wheels that make the difference. Either that or the fact that I overexposed the photo a bit to allow for a better image of the tire inside the wheel well, making it look bigger.


It has been aligned as it was nearly undriveable, but it will need another alignment with the proper instructions for the guy. He was totally focused on getting the caster right first. Came back here to do a search and found that caster is nearly impossible to get in spec with a lift like mine.


Right now it drives great, but as I said in the other thread I feel it's a bit unstable when hitting the high speed dips that are common to San Diego freeways. However, I'm used to driving a BMW and a sportbike, so it may just be a high bar of expectation for a Jeep with a higher COG than normal.


Personally, I would like even stiffer springs and appropriately valved shocks, but again...BMW...sportbike.
Before my SFA swap I was sitting a good 1.5" higher then yours with more tire sidewall(265/75R16's) and it felt much more stable then stock.Granted I was running the pre-softride SkyJacker coils(425lbs compared to 400lbs for OME 927's) modified to use the Rancho RSX shocks(sadly discontinued,best shocks for the KJ hands down ever).

With the SFA,at 9.5" of lift and 35" tires on 15" rims, it still feels much more stable then stock. But again I also went much,much wider track width also using full width axles front and rear.The front coils are the old Rubicon Express V8 ZJ coils and the rears are OME MD duty coils for a FJ80/FJ100.
 

ozone000

Member
Joined
Mar 17, 2016
Messages
80
Reaction score
0
Location
San Diego
I don't have a lot of miles on it and really didn't even before I renewed the suspension, but the rear seems to bounce considerably more under the same conditions. It feels like the large dips are not damped on the rebound as much as they used to be and the overshoot makes the rear light. If that dip is around a curve the Jeep is being pushed up at an angle and the momentum affects the steering. At least that's what it feels like, though it may just be the alignment being out still.

Any luck with the kits from Rocky Road that are supposed to open up more alignment options?
 

Latest posts

Members online

Top