-
-
RIs this bumper still available?
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.Looking at it again and I’m thinking that because my wheels are pushed out past the flare a bit the measuring tape isn’t straight up and...
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.Thanks, I was just reading another thread and noticed where you said a kk stock height is 18 inches. So if I’m sitting at 21 Dont I...
-
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.I don’t have the clevis lift and actually ended up about half an inch shorter than I was expecting as I’m sitting at 21 inches on all...
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.I was wondering why the wheels were out past the flares. I’m running a setup that I thought wouldnt rubbing terribly. 16x7 wheels with...
-
Rr00t2400 replied to the thread Why not replace fender liner after pinch weld?.I was wondering what that thing was called. It appears the hard plastic part that the air dam connects to is the major issue for me as...
-
Rr00t2400 reacted to duderz7's post in the thread Why not replace fender liner after pinch weld? with
Like.
I did trim the air dam off the front bumper, which did require some trimming of the liner, but I don't remember doing anything special... -
Rr00t2400 replied to the thread Why not replace fender liner after pinch weld?.just ran a search for rubbing and thought I read you say you did some cutting up front.
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.No spacers. And am running the teraflex bumpstops
-
-
Rr00t2400 replied to the thread Why not replace fender liner after pinch weld?.So after my alignment my tires are rubbing really bad on the front inner liner and on the flare where the liner connects to it at the...
-
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.Looks great tho
-
-
Rr00t2400 replied to the thread Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16.Got aligned guy said everything went well and all the work looked great. Now it’s rubbing really bad on the front inner fender liner and...
-
-
Rr00t2400 replied to the thread Why not replace fender liner after pinch weld?.Thank you! Prob should have ordered oe replacements. We’ll see can at least attempt to melt the one chunk back. I wish he’d just cut a...
-
Rr00t2400 replied to the thread Why not replace fender liner after pinch weld?.Sadly the tech cut One of the chunks out in two pieces not sure I’d be able to melt that back even if I tried. I got new liners coming I...
-
RMy tech just finished up with my lift and did the pinch welds also. I sent him the step by step way of cutting a flap and melting it...
-
-
-
Loading…
-
Loading…
