Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16

[r00t2400]

Here is a clevis lift thread with some pictures.

How to do a Clevis Lift in 20 minutes

First let me give credit to user TSETS for his idea of using PVC to measure the distance for the lift. Most of this is his work with something I came up with to make it even quicker and easier. I liked TSETS plan but I didn't know what size PVC to buy and I don't have the proper tools to cut...

www.jeepkj.com

Thanks, I was just reading another thread and noticed where you said a kk stock height is 18 inches. So if I’m sitting at 21
Dont I already have three inches of lift?

Here is a clevis lift thread with some pictures.

How to do a Clevis Lift in 20 minutes

First let me give credit to user TSETS for his idea of using PVC to measure the distance for the lift. Most of this is his work with something I came up with to make it even quicker and easier. I liked TSETS plan but I didn't know what size PVC to buy and I don't have the proper tools to cut...

www.jeepkj.com

thanks. I was just looking at another thread where you were discussing kk stock height and said it’s 18 inches. I measured mine before I lifted it and it was at 19 I’m pretty sure. Am I already lifted 3 inches if I’m sitting at 21 all around?

 

[tommudd]

Thanks, I was just reading another thread and noticed where you said a kk stock height is 18 inches. So if I’m sitting at 21
Dont I already have three inches of lift?

thanks. I was just looking at another thread where you were discussing kk stock height and said it’s 18 inches. I measured mine before I lifted it and it was at 19 I’m pretty sure. Am I already lifted 3 inches if I’m sitting at 21 all around?

IF, you measured correctly and are at 21 inches then yes you do have 3 inches of lift
stock KKs were 18 inches middle of hub to bottom of flare on level ground left side

 

[r00t2400]

IF, you measured correctly and are at 21 inches then yes you do have 3 inches of lift
stock KKs were 18 inches middle of hub to bottom of flare on level ground left side

Looking at it again and I’m thinking that because my wheels are pushed out past the flare a bit the measuring tape isn’t straight up and down and that’s where the extra half inch is coming from. So yeah operator error it seems.