Quick help needed please!

[HoosierJeeper]

I'm taking my front driveshaft out to replace the rear CV and I got the transfercase end loose. The diff end, I started taking out a bolt and some fluid started coming out (not a drip quite...but it was following the threads on the bolt). I ran it back down because I thought that the diff was sealed? Any thoughts- I'd really appreciate it!

 

[Snail Farmer]

It's normal for a little bit of fluid to be there. It should be fine.

 

[TwoBobsKJ]

X2

The yokes on both ends of the driveshaft are separate from the guts of the T-case and the front diff. Some fluid seeps out of the CV's but nothing to be worried about.

Bob

 

[HoosierJeeper]

Cool. Got it reassembled and trying to get bolts back in...any tips on aligning it?

 

[Cardhu]

block the wheels on both sides and put T case in neutral. You dont want it rolling on top of you while underneath.

Lift or not, you wont fit under the front diff.

 

[tommudd]

block the wheels on both sides and put T case in neutral. You dont want it rolling on top of you while underneath.

Lift or not, you wont fit under the front diff.

yes you can :happy175:

 

[Hedsic]

block the wheels on both sides and put T case in neutral. You dont want it rolling on top of you while underneath.

Lift or not, you wont fit under the front diff.

I can without any issues.

 

[Porkchop]

X3