PCI wire aftermarket radio install

[aerodyn]

2005 Jeep liberty Renegade aftermarket stereo install do it yourself I have a PCI bus wire remaining where does the PCI bus wire get hooked up, because currently cannot use power door locks and the passenger side parking lamps stay on while driving all the time anybody have that similar experience can you please guide as to where I wire the PCI bus wire?

 

[DadOSix]

2005 Jeep liberty Renegade aftermarket stereo install do it yourself I have a PCI bus wire remaining where does the PCI bus wire get hooked up, because currently cannot use power door locks and the passenger side parking lamps stay on while driving all the time anybody have that similar experience can you please guide as to where I wire the PCI bus wire?

Might help to know what head unit you are installing; or at least a link to the diagram

 

[LibertyTC]

Welcome to the forums.
Here is the 2005 factory manual & wiring diagrams: https://colorado4wheel.com/manuals/Jeep/KJ/2005JeepKJServiceManual.pdf

 

[aerodyn]

Welcome to the forums.
Here is the 2005 factory manual & wiring diagrams: https://colorado4wheel.com/manuals/Jeep/KJ/2005JeepKJServiceManual.pdf

Thanks for the information. I’ll post the head unit information including pictures. seems as though the installer cut the wires and spliced some of the wires to the radio and left the PCI Bus wire off.

 

[DadOSix]

Meanwhile -

have a look at this:

https://www.jeepkj.com/threads/no-bus-error-when-installing-aftermarket-headuni.28028/