-
-
nbas replied to the thread Replacing radio, power but no sound, and yes I connected the Blue/White cable.It is easy to check if it is the Boss output. Play white noise and check its outputs with a voltmeter (on the unit not at the door cables) -
Lots of good information on this site. Everything I know about KJ’s I learned here. You probably need to replace the springs and shocks...
-
nbas replied to the thread Replacing radio, power but no sound, and yes I connected the Blue/White cable.The Boss has built in amps. If you have the KJ Limited Infinity system, and want to use the Boss's built in amps, you need to wire the...
-
nbas reacted to KJowner's post in the thread Replacing radio, power but no sound, and yes I connected the Blue/White cable with
Like.
Sounds like a faulty Boss. Unless your car is a Limited with the old Infinity sound system, it has amps in the front doors that ran the... -
Hello ! I'm brand new in this forum, my name is Pascal, I'm french and I live half time in south of France, half time in south of...
-
nbas replied to the thread Compatible tyre on KJ ?.They are for different rims and they have different diameters, original is for 16" rim (29.9" diameter), and the offered ones are for...
-
nbas replied to the thread Really bad sound, is it the transmission?.I have the same exact issue! I think it is the valve solenoid pack but it has to be checked. The engine lamp went on and I checked with...
-
nbas replied to the thread Regearing and Locking Diffs.When I regeared, I also added front and rear ARB lockers. See my signature for the correct Part No... Regearing for me was a must. Jeep...
-
OME lift with JBA uca is the way to go, the ride improvement both off and on the street is amazing, i trail ride green and blue trails...
-
I put the .dxf files out for anyone to use. You can have them made by wherever or whoever you want. I like sendcutsend, since it is easy...
-
All the faults are probably from one failed ABS sensor, check all 4 wheels for damage on the ABS sensor cables, failing anything obvious...
-
Welcome, Neil. :D I’m sure you will find some familiar faces from LOST here. Wheel speed sensor was my first thought as well.
-
nbas replied to the thread Calibrate Speedo AGAIN AFTER I Regear?.If you put larger tyres, you need to re-calibrate the speedo (readjust revs per mile) with the DRBIII procedure as below...
-
-
Loading…
-
Loading…
