Frankenlift components

[kjweston]

What exactly is in the Frankenlift? I have the OME927 and Rancho 17505, am I missing some kind of spacer. I don't feel like it's yielding as much lift as other frankenlifted kjs.

 

[kjweston]

Heres from the center of center cap:

You must be registered for see images attach

 

[JMSMN]

you will need a daystar upper strut plate and a spacer that they only get made for them. I believe a rustys spring spacer will work, its 3/4", think its the same. To get the same height just use a upper spacer plate and do a three ring clevis lift. Works great, thats tyhe setup I have on my 06' sport.

 

[kjweston]

Does anyone know where to buy just the daystar top plates? I've been googling it for a few minutes and cant find anything. or if anyone has any used ones.

Thanks

 

[JMSMN]

http://jeepinbyal.com/prod-Daystar_Strut_Mount_LH-583.aspx this is for the LH, on the page there is a RH one also.

 

[tommudd]

I sit at 23 1/2 inches center of wheel to bottom of flare WITHOUT using any of the above Frankenlifted parts and thats with 97,000 on the springs and shocks.

Use a 3/8 inch think upper strut plate, ( I can send you plans to make your own or RRO did sell them Rustys are only 1/4 inch think giving you 1/2 inch of lift) and 3 clevis rings, way cheaper and works great