2002 LCA Cam Bolt size/thread pitch?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ebelements

New Member
Joined
Jun 17, 2013
Messages
20
Reaction score
0
Location
Cincinnati
Tried searching and came up with nothing. A few of mine are pretty beat up from "persuading" them to loosen and I'd rather recondition the threads than spend $50 apiece for new ones. I picked up a metric tap/die set so I'm ready to rock, just need to be sure of the size is all.

Thanks in advance!

Erik
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
41
Location
Somewhere between being sane and insane!
Any tap/die set worth a damn will have a tread pitch/bolt size gauge included.They don't list the actual size in the parts book or FSM but it should be in the M14 range which most tap/die sets never go that big,well the cheapy kits.
 

ebelements

New Member
Joined
Jun 17, 2013
Messages
20
Reaction score
0
Location
Cincinnati
Well I suppose my tap/die set isn't worth a damn then, ha. I'm sure it'll get replaced with a nice, expensive setup one day, but generally if the damaged bolt in question is of a reasonable price I just replace it rather than repair.

It does however have all of the larger sizes, and visually I want to say it seemed to line up with an M16, but I'm not betting 50+ bucks on it. I did just order the "thread checker" metric set so hopefully this won't be an issue in the future.
 

Latest posts

Members online

Top