-
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Yea I tried the nickels and dimes approach and finally said done. It’s not a daily and I found a buddy with a puller. It’s way easier... -
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Oh man that guy went full custom with a 302 ford not even a 4.7. It seams easier with a 4.7 and a 45rfe trans that I don’t have...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Th and again for all the help, I did the dead. Pulled it apart and plan to clean up this used set of heads and reinstall or find a 4.7...
-
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Also I unplugged the coil and injector on number 6 the open exhaust valve cylinder. Trying not to drive it but if I did is that ok or is...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..183k, I ordered the used set of heads and plan to pull the motor next week. First step to check the cylinders.
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..I’m leaning to pulling the motor, taking that chance to do the main seal, oil pan, head gaskets with these used replacement heads and...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Ok let’s talk turkey. If I pull the heads and cylinders look good can I bolt on a used set of heads and go? And the set I have was not...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..True, thoughts on a set of used take off heads they claim are good to go. Found a set for 100$ plus shipping. I knew it needed a head...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..tried a bore scope lastnight but cant get the angle to see trying another one with a mirror tonight. what's a better move to swap heads...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..This seams to be the answer. I’m loosing faith anything else could keep the valve open like this. Also it makes sense why if the rocker...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..No luck, can’t get the valve spring out and now I’m thinking it may have dropped a valve seat that’s wedged holding the valve open. If I...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Feeling it may be or a lot of carbon and week spring. We know tonight I plan to swap the spring, valve seal and lifter while trying to...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..With allot of looking it may1/8th lower than the next cylinder both with no cam pressing on the rocker. Could that be carbon build up...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Best I can measure they are the same. My best option I feel is to install a new lifter, new injector and pop the rocker back on then...
-
Jhkj04 replied to the thread Oil on plug. Chasing codes..Don’t disagree however with this broken injector and a couple others it will need those. Should I pull the valve spring and check the...
-
-
Loading…
-
Loading…
