Search results

  1. JeepKj03

    high mileage sand dune riding

    At silver lake it just depends on how you want to ride the dunes. You can take it easy like your riding the back roads or you can go jump test hill!!!! I have seen some crazy things out there before. If a Subaru can take silver I don’t think you will have a problem.
  2. JeepKj03

    How to engage 4x4

    Read your owners manual, it will give you the proper way to shift between the different ranges. There can be some slight grinding between high and low. Over time you can get better at timing it right based off of speed. Also there is a moment that is needed when shiting into or out of neutral.
  3. JeepKj03

    2005 body yaw when applying and lifting throttle - fix & stay OEM or not with fix?

    Just a reminder if you do replace them you’re self. Make sure you tighten the bolts when the vehicle is on the ground. This will place the bushing in a neutral state and will keep them from tearing.
  4. JeepKj03

    2005 body yaw when applying and lifting throttle - fix & stay OEM or not with fix?

    I had the same issue, it is the track bars. I replaced mine with bushings from rockauto and have not had a problem and that has been just about 2 years now. The only problem is you need a hydraulic press to get them out. I believe you can buy the whole bar.
  5. JeepKj03

    Surprised

    Well I had to take the jeep to the dealer today to do a coolant flush. I know I know, I had a few reasons why I had to break down and do it: 1st don’t have tools to do a proper flush and 2nd the spot to hold the used coolant. This was the first time the jeep has been to a dealer in almost 80k...
  6. JeepKj03

    speed control at throttle body removal?

    I just drilled a small hole the best I could into the location the old tab was in. Then I just screwed in small Phillips screw and left it out a bit for the cable to connect to. I will take a picture tomorrow and post it. I have not had one problem with it yet and that has been over a year now.
  7. JeepKj03

    Trans filter pan?

    Oh do they rot out. I replace mine every time I do a fluid and filter change because it’s only 10 bucks to buy from the dealer. Now you can’t beat that. You are getting robbed if they want $450 to do that job. There must be a ton of labor charges or maybe gold plated pan.
  8. JeepKj03

    Diesel Power Mag

    I found the article, they posted it on their website. http://www.dieselpowermag.com/tech/1110dp_jeep_liberty_crd_mileage_modifications/index.html
  9. JeepKj03

    Diesel Power Mag

    Well they finally got something to the presses about the CRD they have been testing. They have yet to post the article online but I could share a brief overview. They used a green diesel engineering toner to reprogram the ECU to do a few things. Disable the EGR and to advance the timing about...
  10. JeepKj03

    Ground Point

    Thanks for the diagrams, those are the ones I was looking for. Got to get a few voltage and ohm reading to dial out the motor as the problem.
  11. JeepKj03

    Ground Point

    Can anyone tell me where the rear wiper motor grounds out to? I'm having a problem with the wiper only clearing only part of the window and might believe it might be a ground issue. The motor is new within the last year so I do not believe that is currently the issue. :think:
  12. JeepKj03

    Engine skip or stuter leading to shut off.

    Have you checked to see if any other codes have come up since then?
  13. JeepKj03

    KJ: 1, Buick LeSabre: 0

    glad to hear your both all right
  14. JeepKj03

    Frt. Drive Shaft

    I got my parts from rock auto for about 120 out the door with the 5% discount, i belive.
  15. JeepKj03

    Probably having rear suspension issues..

    I just replaced my link bar bushing a few months ago after the back end kept coming out under acceleration and deceleration. Boy did that make a difference. She drives straight as an arrow now.
  16. JeepKj03

    Frt. Drive Shaft

    It’s a good idea to replace the whole CV joint as you don’t know what has made its way up into the bearing and started grinding the metal away. I had a torn boot a few weeks ago and went off roading and boy did I know it was bad. Just fixed it last weekend, but have yet to place the drive...
  17. JeepKj03

    Weak Brakes? 2003 Liberty

    It’s a good idea to bleed the breaks out anyways. I’m sure the fluid in there is black, when it should be clear. That will help you towards a good breaking system.
  18. JeepKj03

    OEM Foglight help

    Since you said that they did not come stock from the factory with fog lights, they are not part of the normal wiring harness. I can take a quote from one of my favorite movies. "If you don’t know where to start go back to the beginning". Follow where you know your harness is at the lights and...
  19. JeepKj03

    OEM Foglight help

    If you have the full wiring I would say just go to a junk yard and see if you can find a used multifunction switch. If you strike out there you can suck it up and buy a new multifunction switch or you can take another route and wire in a switch to turn on the fog lights every time you turn your...
  20. JeepKj03

    New driving lights

    Watch those back lights. They look like the same type I had up front on my bumper and they are junk. They lasted about a year before the lens started to get water in them. I got tiered of them and just took them off last month. I hope the best for you. I do have to say it is nice to have...

Random media

20140822 142703
Trailer2
Rola Roof Basket 59504
Flex it!
Big Sky, MT
4035.jpg
DSCN2776
Black out grille
S8000534

Latest posts

Members online

Total: 432 (members: 3, guests: 429)
Top