Recent content by barryh

  1. B

    Upper Ball joint Dust Boot

    Does anyone know where I could buy new Dust Boots for the upper Ball Joint on a 2004 Liberty. I tore one while changing front springs and have replaced Upper arm complete. Would be nice to get replacement boot to keep arm as spare. thanks barryh
  2. B

    Crankcase ventilation hose tee junction fail!

    Failed T Piece PCV System I replaced the broken T by cutting the plastic pipes and replacing with a brass T of 5/8''(from an underground irrigation sytem) and buying in a length of thin walled silicon hose from a supplier in England. The hose has good temp characteristics and makes a tight fit...
  3. B

    Window regulator arm replacement clip

    I can not pull up the picture of the clip that you want so I am in the dark. However I buy all of the various clip styles at any of the bearing shops-- where you would go for wheel bearings or similar. Cannot offer names as I am in Australia--see how you go
  4. B

    Drained Transfer Case

    Changed the oil on the NP242J Transfer Case and found that there was a lot of gritty bronze in the old oil. I have had no problems with using the case and there are no strange noises. It does stick in 4WD part time sometimes when changing back to 2WD but I get around that by backing up to get it...
  5. B

    Front Bumper

    Front Bumper KJ Thanks for the part No KJ03. I will order 2 from supplier in US as I see that he has them listed-- big help-- barryh
  6. B

    Front Bumper

    Can anyone who has experience with removing the front bumper(plastic cover) describe the clips which can be reached through the flap at the front of the mudguard liner. There are only 2--one each side and the location is above the fog light and below the turning light. I have been trying to find...
  7. B

    Part No for Front Springs

    I am going to do a small lift to the front of my 2004 KJ(3.7 Petrol) by using Mopar CRD springs. I have the Parts list that applies to my model but I cannot interpret which spring from the list applies to the Diesel. I understand that there were 2.5 and 2.8 diesels around my year and that they...
  8. B

    CRD coils on a Petrol KJ?

    crd springs on KJ Question for Bandit Steve Did you replace the springs with new mopar CRD? and second question. Did you replace the shocks at same time. I was wondering whether your std shocks were coping with extra load. barryh
  9. B

    Front pinion seal question

    Changing the front seal is easy if you have the tools. firstly you need to remove the front drive shaft which is held by 6 x8mm bolts with 8mm head size-- need good quality socket especially if some fool has loctited threads.Second problem is to hold shaft while you break loose the bolts-- I...
  10. B

    Fan clutch nut

    nut for clutch fan I am surprised to see that your 36mm spanner would not fit the shaft on your clutch fan. I recently ground up an old spanner from a junk shop reducing the width and opening the jaws to exactly 36mm, and this is an exact fit to the nut--puzzle for me. barryh
  11. B

    Front differential leak

    Leaking KJ front Diff As far as I can see the main reason for leaks from the front diff are hits(on raised rocks etc) that spring the silicone joint on the cover. The best practical way to fix is to get out the angle grinder and cut through the1/2"(it may be 12mm) bolt that holds the front...
  12. B

    Front pinion seal

    Pinion Seal Thanks very much for info. That works for me. barryh
  13. B

    Front pinion seal

    Does anyone happen to know the part number for a front pinion seal(front input shaft). The parts list I have seems to be a dead end and I would like to have the part on hand before I pull the old one. Thanks barryh 2004 KJ Limited
  14. B

    Battery position

    Thanks for the prompt replies to my query on battery. Surprised to find that the position is the same but nice to be able to buy the US version at about 10% of the Aust price. barryh
  15. B

    Battery position

    Hi can someone tell me whether the battery on the US model 3.7L is on the left side. I am in Australia and have the r/h drive model and the battery is on the left. The part No for both models appears to me to be the same, but I do not want to order from US if they are different. thanks in...
See more

Random media

NEPA trail
2014 04 25 17.54.59
My first modification.
The night crew
At the Air Force Museum in Dayton.
F27B5819-2A57-4EDE-A3BD-DCF8E43AC863.jpeg
20150519 085135~2
After Second Wash
At Avon NC

Latest posts

Members online

No members online now.
Total: 376 (members: 0, guests: 376)
Top