groundpounder
New Member
I have an '08 Liberty. I get no heat at all. When I first turn on the heat it's luke warm for about 30 seconds and then cools off to ambient. The blend door is moving when I adjust the temp knob. When I pull the heater hoses off, there's no coolant there. The heater core has coolant in it as evidenced by putting a garden hose on one side and seeing coolant flow out before it turns to clear water. It's not plugged as water flows freely through it with the hose. The temperature gauge sits just to the left of the 12:00 position once the engine has warmed up every time regardless of the outside temperature.
I did replace the under dash module as the door to direct air to the dash vents was broken. But the no heat issue existed prior to that. I'm at a loss here. Anyone else ever run into this situation?
I did replace the under dash module as the door to direct air to the dash vents was broken. But the no heat issue existed prior to that. I'm at a loss here. Anyone else ever run into this situation?