Help for a Jeep noob. Need instructions

[Not for highway use]

Hi All,
Need to lift my Jeep so already ordered OME springs and shocks (FYI $AU1350)
But.......
I'm reading all about clevis lifts, pucks, spacers etc. Are there some links or good (I'm pretty simple :emotions34 step by step instructions on how to do all these?
Thanks in advance.

 

[jeeplib05]

Clevis lift is adding or spacing out the top of the clevis fork from the base of the shock, providing lift
"Pucks" are used as new bumpstops in the rear as to not bottom out and blow your shocks, they bolt down to the lower spring perch
Spacers are what you don't want to use at all so don't worry about those

For clevis lift, just measure the amount of lift you want (actual lift given will be double what you measure) and loosen the upper clevis bolt, slide down and tighten
Then hockey pucks, drill hole in the center of the lower spring perch and bolt two of them down (if going with 2.5" of lift)

 

[tommudd]

clevis lift is adding or spacing out the top of the clevis fork from the base of the shock, providing lift
"pucks" are used as new bumpstops in the rear as to not bottom out and blow your shocks, they bolt down to the lower spring perch
spacers are what you don't want to use at all so don't worry about those

for clevis lift, just measure the amount of lift you want (actual lift given will be double what you measure) and loosen the upper clevis bolt, slide down and tighten,not over 3/8 of an inch
then hockey pucks, drill hole in the center of the lower spring perch and bolt two of them down (if going with 2.5" of lift)

added some to his

 

[HoosierJeeper]

http://www.jeepkj.com/forum/f202/how-purchase-install-wesway-lift-43781/

Download the photobucket fix extension so you can see the pics.

 

[Not for highway use]

Sweet. Thanks fellas. That's is a great link. Going to have a crack at a clevis lift soon.