Anybody else running the JBA coil overs and have them squeak when driving. I’ve had mine in now for a little over a year and about two weeks ago the passenger coilover started squeaking over every bump in the road. It’s driving me nuts hearing it all the time. It has always made some noise...
Anybody else seen these bumpers made by wam? Not my style nor what I would want on my jeep but at least someone is trying right. Just curious if anyone else has seen them?
Anybody have pictures of an 05 or newer with the matrix system on it? Thinking of getting one for the crd and possibly trimming the bumper but the only pictures I’m seeing are on 02 to 04.
This past weekend I replaced my old JBA coilovers with the new version and changed the rear springs as well. I dropped the jeep off at a well known 4x4 shop in town that I always go to for my alignments on all my jeeps. However this time I am a little worried about the results.
Here is my set...
Anybody here run the extended sway bar links from JBA? Any gains from them? I bought new Moog ones when I did the rebuild but on my recent trip to flagpole one of them had some issues and bent the bolt and the bushing was deformed. Not sure how it happened but noticed a noise on the way home and...
Anyone else here running a rocklizard front bumper? I'm trying to find out if anyone has put lights in the two holes located in the middle of the bumper. It's a 2.5 inch hole and I am having a heck of a time finding lights that would fit and look right in them. I think I saw someone on here with...
Well after much consideration and thought I finally decided on what to do with some of the liberties I have. Background: About two years ago I bought my first Jeep Liberty a 2003 limited. I have since completely rebuilt the motor and trans and got a very low mileage transfer case. I always...
Just put the JBA 4 link on my jeep and since then I've had a noise that sounds an awful lot like a pinion bearing going bad. I'm not sure why it would go bad just because I added the 4 link. Anybody else running one of these and getting road noise through it possibly?? I'm lifted 4 inches with...
Anyone replace a fuel pump in their Liberty yet? If so what brand is good to use and will last? Mine just died on the way home from myrtle beach, luckily it was right outside of my hometown. I have a 2003 3.7 liberty.
Thanks in advance
Daniel
What all is needed to get in the 4 inch range with the coilover? Do you need the top plate? Just trying to weigh the difference between the coilovers and the regular spring setup before I pull the trigger. Still have yet to decide which route to go.
Thanks
Daniel
I recently pulled the motor out of one 03 liberty and put it into another 03 liberty but now when I try to start it it will run for about 2 seconds before shutting down. There is one code showing up p1686 I believe this has to do with the SKIM. Any ideas on where to look or what to try to fix...
Will ome springs from a kk also work on a kj. I looked on the ome website and they seem to be the same part numbers but I just wanted to make sure before I buy them. I found a used set with less then 2,000 which is why I'm asking.
Thanks
Anybody use one? Is it a good one or goes bad in a couple months? I know some things are better to go to the dealer so just wondering if this is one of those things.
Thanks in advance
well as the title says I am rebuilding a motor for my 2003 jeep liberty limited. I thought about just getting a new motor or having a low miles one from a scrapyard put in but I decided to go this route so I could do it my way and know it was built right with quality parts. Also I weighed out...
Well for Christmas this year I went ahead and bought myself another liberty. These little jeeps are addictive. This was an 03 sport with an engine knock. IT was just to good of a deal for me to pass off. Had full skids on it which I put on my DD untill I can get something better as well as...
I have noticed lately that my coolant level drops about 2 inches below the cold fill line after 2 weeks of driving, and if I go on long drives it seems to be more missing then just short trips around town in those two weeks. Now I just had the system flushed and new radiator and thermostat, and...
Well today I went to check the oil because of all the work I have done to the libby recently and noticed it was about halfway in-between the marks. So I know it uses some oil anyway that's not my concern right now. When I went to put more oil in and removed the fill cap I noticed a milky residue...
Here is my new to me 2003 jeep liberty limited. I bought it about 3 months ago with a dead tranmission and spent the next two months fixing it and getting her back on the road. I bought a very low milage transmission (45,000) and put that in. At the same time when I had the motor out I decided...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.