I have a custom made hitch that was made for my 1980 Jeep CJ7. It is made from 3/8 inch steel and has a 6 inch offset from the ball mount to the mounting holes. It includes a mounting plate with captured welded on nuts and has 4 mounting bolts with washers. This hitch was never abused and will...
I have a 2006 Liberty sport 3.7L. I would like to take out the IAC control for passage cleaning. There is a single torx head bolt holding the control in place. Could someone please tell me the correct torx head bit that would fit this bolt?
Thank you.
Does anyone know why carbon builds up on the throttle body? Are the intake valves still open during the exhaust stroke letting carbon build up under the throttle plate?
Thanks.
I don't have to pay labor if I just do the recall. I have to pay labor if I have them put the moog's in. That labor charge will include the time they spend pressing in the dc replacement ball joints, reassembling the jeep and declaring it a safe vehicle than taking it all apart again. I will be...
I have an 06 liberty and would like to have the lower ball joints replaced with the moog greaseable ball joints. I would pay for the labor because they are after market items. I called two local jeep dealers and both service managers said the same thing: The recall has to be done first. They...
We have a new 06 liberty v6 with 4800 miles. It has developed a small oil leak. It is on the front of the right cylinder head. It is the cylinder head access plug. One of the lower a/c compressor mounting bolts is threaded into it. The oil is not from the plastic oil filler neck. I cleaned the...
Ordered lug nuts from " brandsports.com" $35.15 with shipping for 20 nuts. They are Gorilla#41187 1/2x20 3/4hex chrome acorn bulge style. Should have them in about a week.
Thank you. \:D/
I would like to replace the crimped on caped lug nuts with chrome lug nuts. I would also like to keep the 3/4" hex socket size. Could someone advise me on where to find them?
Thank you.
To extend the life of the original ball joints should this be done? Take a spray can of white lithium grease and using the spray straw up under the lip of the dust boots give all four ball joints a shot of grease at each tire rotation. Would this void my warranty? I was planning on doing this...
esp/bas warning light coming on
Its back. The warning lights are coming back on again. Brought it back to the dealer for the service dept to check the trouble codes. They told me they are going to replace the anti-lock brake module along with the hydraulic control unit and have them coming in...
esp/bas light comes on
Today I brought my new liberty to the dealer where I bought it and had the clockspring/steering angle sensor replaced, part number 56010619ae. I was told that several other people that bought 06 liberty's there are coming back with the same problem also.
Thanks for the info.
thanks for replying. Yes the guage cycle works correctly, just like the service manual says.The manual also says to use a scan tool to get the trouble codes. I also used the ign. key to get the dtc's, turning it on and off three times fast ending with it on. The odometer just displays the...
On my new 06 gas sport I tryed to display any dtc's using the key on/ off three times quickly routine. Nothing happened. Is it because there is no dtc's to display or is the procedure incorrect? Holding the trip odometer reset button down while turning the key on is for the instrument cluster...
I just picked up a 2006 Jeep Liberty 3.7 L automatic that I ordered new. About 3 miles after I left the dealer's lot, the ESP/BAS red warning light and the ESP orange indicator light came on and stayed on along with a chime sound. The weather was cold and clear. I returned to the dealer and left...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.