CorDog009
New Member
So I got around to doing one of the front lower ball joints, and while I had it torn apart, I put a new hub bearing assembly in since they have 166k miles on them. Now the ABS, ESP/BAS and traction control lights are on after driving to the store. Also when I got back, my wife noticed the brake lights were staying on. I hit the pedal and they went off. So I disconnected the battery and waited 30 mins, lights still on. Drove about a 1/2 mile at up to 50 mph and lights still on. Hooked old hub assembly back up to see if the new one was defective, lights still on. I'm stumped because everything was fine before the new hub assembly went in. I've read it could be wheel speed sensors, clock spring, steering angle sensor, etc. My wifi scanner and apps on my phone didn't pull up any related codes, but it's not an in-depth scan tool either. I wonder if installing the other new hub bearing assembly will correct the issue..my back started acting up and I decided to just do the one side this weekend.
Last edited: