Oil Filler Cap

[Piriaka]

Hi All - this is a small thing but a pain in the .... For some reason, it is at times such a struggle to get the oil filler cap off. My Jeep is a V6.

Is this a usual problem,?? It just won't move except with extreme pressure - son helps out and even he finds it hard??

Any ideas??

Regards

Ray

 

[uss2defiant]

I have the same issue as well.
I usually clean it and apply some oil around the edge when I remove the cap.

 

[tjkj2002]

Problem solved for $8...................


Oil Filler Cap Wrench for Dodge | Lisle | 34000

You must be registered for see images

 

[Sephiroth]

I have the same problem, my solution is I put a rag over the cap and use channellock pliers.

 

[dude1116]

Problem solved for $8...................


Oil Filler Cap Wrench for Dodge | Lisle | 34000

You must be registered for see images

Either this, or a really grippy glove.

 

[LibertyTC]

Once the cap is off, I Clean the threads with alcohol.
Then use white lithium grease or Vaseline to the threads. Will come of so easy next time.

 

[ltd02]

Problem solved for $8...................

Guess if they actually make a wrench for this it must be a common complaint. I just put a very light coating of grease on it when it starts to get difficult.

 

[tommudd]

I just grab it, growl real loud and twist it off :shrug::icon_lol:

 

[yellocoyote]

Grease the threads, and don't tighten it all the way.

 

[Birdman330]

Rubber strap wrench.

 

[CactusJacked]

You needs to eat more spinach!

 

[colorado76]

I cover the cap with a rag and twist it off with channellock pliers, and then use the rag to wipe the threads clean. Then with my finger, I grease the threads with clean motor oil before I twist the oil cap back on each time.

 

[TwoBobsKJ]

Problem solved for $8...................


Oil Filler Cap Wrench for Dodge | Lisle | 34000

You must be registered for see images

This ^^^

Same issue was posted in the past and I took Troy up on his suggestion and bought one. Does wonders for my mood when changing the oil - not grumpy anymore when trying to twist the cap off :favorites68:

Bob

 

[CactusJacked]

My cap comes off by hand no problem. What a racket! Have a poor design that can make something hard to remove by hand, then someone else can develop a tool to remove a cap that should only be slightly snug. Next I spose they'll be coming out with a special tool to assist you in lowering the sun visor.

 

[Porkchop]

Or checking your Trans fluid.