Marker Lights - Help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cdn beaver

Full Access Member
Joined
Jul 9, 2011
Messages
29
Reaction score
0
Location
Ontario, Canada
The drivers side front and rear marker lights have stopped working. I changed the 10 amp fuse (#7) and they worked again... This morning I discovered that they no longer work again.

Any ideas where to start looking? I suspect a short to ground somewhere?

Any help is greatly appreciated.
 

Billwill

Full Access Member
Joined
Nov 26, 2009
Messages
2,193
Reaction score
670
Location
White River, South Africa
The drivers side front and rear marker lights have stopped working. I changed the 10 amp fuse (#7) and they worked again... This morning I discovered that they no longer work again.

Any ideas where to start looking? I suspect a short to ground somewhere?

Any help is greatly appreciated.

So did the fuse blow again?:shrug:
 

Billwill

Full Access Member
Joined
Nov 26, 2009
Messages
2,193
Reaction score
670
Location
White River, South Africa
Yeah. Fuse blew again.

OK sounds like an intermittant short to ground somewhere ie. the supply wire is chaffing to the chassis under certain circumstances...going over a bump...turning the steering wheel in a certain direction etc.

Not fun to find....what year and model is your Jeep so I can have a look through the circuit diagrams:shrug:
 

Members online

No members online now.
Top