Magnaflow Exhaust

[blue_kjR417]

Hey after 93k my muffler is getting kinda blown out. It's not near as quiet as it used to be. I really like the sound of the Magnaflow setup but I just wanna buy the muffler. Does anybody know what series or model or anything of that muffler in that setup the offer?

 

[RenegadeJay]

Judging by the kit that MagnaFlow sells it can be either of 2 mufflers. It's a 5" X 8" muffler and the kit says it is 24" long and it appears to be a center inlet and offset outlet. Depending if they mean the length of just the oval muffler or the overall length. If it is 24" overall then it could be part #12256 for stainless or #14256 for polished. If it is 30" overall (the 24"muffler plus the inlet and outlet) then it could be #12286 for stainless or #14250 for the polished. Hope it helped.

 

[Ry' N Jen]

Have you been rat baggin your KJ Wes?
Our KJ has over 100K on the clock and it's still as quite as the day it left the factory!!!

Man... I need to buy you a plane ticket up to BC so you can fry my KJ's factory exhaust system!

Then I can persuade Jen to let me install a noisier system under ours!

 

[blue_kjR417]

Have you been rat baggin your KJ Wes?
Our KJ has over 100K on the clock and it's still as quite as the day it left the factory!!!

Man... I need to buy you a plane ticket up to BC so you can fry my KJ's factory exhaust system!

Then I can persuade Jen to let me install a noisier system under ours!

Haha, I haul ass occasionally... lol

 

[TigerClaws]

Here is the one i've put on: Built pretty strong, and give a lot of sound as long as more power all along the powerband althought its noisy.

You must be registered for see images attach

 

[HoosierJeeper]

How much drone do you get with, tigerclaws.......

 

[Dave]

I like that flomaster.....nice and compact and black diamondplate but if it is too noisy then you won't be able to sneak around, Weston.......haha

Dave

 

[Ry' N Jen]

Install one of these!
http://www.jegs.com/p/JEGS/JEGS-Electric-Exhaust-Cutouts/1231909/10002/-1
Or if you have deep pockets...
http://www.jegs.com/p/Dougs-Headers...teel-Electric-Exhaust-Cutouts/759640/10002/-1

Or you could go inexspensive with this one!
http://www.jegs.com/p/Mr-Gasket/Mr-Gasket-Exhaust-Cutout/744831/10002/-1

J/K!

 

[Dave]

Ryan.....you can get a locker for what that second one costs....

Dave

 

[Ry' N Jen]

Ryan.....you can get a locker for what that second one costs....

Dave

And that I will Dave!
That's why I added the Just kidding!
The KJ ain't no Hot Rod or quarter mile strip vehicle!
I just couldn't resist posting those!

 

[HoosierJeeper]

And that I will Dave!
That's why I added the Just kidding!
The KJ ain't no Hot Rod or quarter mile strip vehicle!
I just couldn't resist posting those!

I thought you wanted a Jeep dragster.....

Just kidding!!!!

 

[Mopar4L1fe]

Install one of these!
http://www.jegs.com/p/JEGS/JEGS-Electric-Exhaust-Cutouts/1231909/10002/-1
Or if you have deep pockets...
http://www.jegs.com/p/Dougs-Headers...teel-Electric-Exhaust-Cutouts/759640/10002/-1

Or you could go inexspensive with this one!
http://www.jegs.com/p/Mr-Gasket/Mr-Gasket-Exhaust-Cutout/744831/10002/-1

J/K!

Those will make the KJ sound like a ricer won't they?

 

[Ry' N Jen]

Those will make the KJ sound like a ricer won't they?

To honest with you, I've never heard a V6 with open headers!
Plenty of V8's and English four cylinders with reverse megaphone exhaust systems.
But I imagine a 3.7 litre with a real dual exhaust system might sound alright!
Like I said I dunno!
How 'bout you?

 

[kj924]

I've heard a few v6 with open headers at the stock car track back home....not a good sound if you are use to a v8 open header.

 

[blue_kjR417]

negative i will have no annoying flowmaster under my kj, nor will I spend more than around $100 on one. If I can't get that magnaflow alone I'll probably just replace with a stock muffler.

 

[KJ zGal]

I bought an Aero Turbine for my KJ...not a whole lot of drone when driving at higher RPMs, and it wasn't too expensive either. If you youtube "Aero Turbine Jeep" you can find the videos I have of the sound.

 

[maverick7321]

I think this is the one I used and it sound great it was a little short so i had to have some extra exhaust pipe added to make it fit but that was not a prob and has not affected anything.

http://shop.advanceautoparts.com/we...et-MagnaFlow_16120065-P_N3333D_P|GRP2023P____

Total installed from a local muffler place was $110

 

[n8fis]

You'll be sorry you ever put one on, blue kjR417. The drown
you'll hear in the cab will drive you nuts. It will sound OK
but NOT like a V8 on the outside. The 3.7L V6 does NOT
make a powerfull sound in the first place like a V8.

Just a friendly warning...

 

[TigerClaws]

Yeah its not a nice sound as a V8 does but i picked this magnaflow as an offroad muffler in 1st place, sound was of no concern to me. I can tell you, itll take a heck of a hit before it dents. I had 3 collars holding it and had it welded also. I am usually rough on things, and since im going to get a skid plate i needed to replace that before i do. I dont hate the sound but it is too loud. Still, i enjoy it because i know itll take a good amount of hit before i break it. But if you dont go offroad, you dont need it.

 

[TigerClaws]

I paid 87$ US and 20$ to get it installed as i wanted it welded also...