Factory fog light wiring.

[Ry' N Jen]

The link below shows the installation instructions for adding Mopar fog lights.
http://site.justforjeeps.com/guide/82207998.pdf

In window 31 it shows the two WT-TN wires being plugged into the main plug
which in turn plugs into the left side of the multifunction switch.

What I am unclear with is, where do you plug in the two joined WT-TN wires?

Which receptacle?

 

[Pippobug]

Hi,
i have had the same problem, I attached it to what I thought was the correct wire and the lights worked okay, but on the display pannel now the fog light comes on when I turn the lights on to half beam but the light indicating the normal lights on doesn't!? When I turn the light to full beam no light appears on the display, but when I turn the fog lights on the light on the display comes back on!!! I did it as per the instructions you have posted using the correct wice colours!! Can anyone help so that the lights finally come on correctly on the dashboard?
Ryn sorry for hi-jacking this post but hopefully it will help you to.
Fil.

 

[Ry' N Jen]

One good thing is, the dash light for the fog lights illuminates!

There are days when I want to douse this Jeep in gasoline and set it on fire and run around
it naked while screaming!

 

[Pippobug]

Ryn,

I share you frustration occassionaly with the Jeep electrics. Yes, mine turns on but not as it should do that isn't helpful. I am sure someone here will come along and give us the right answer to our problem ( hopefully soon)

Fil.

 

[Ry' N Jen]

I f:favorites68:k around with it in the morning.
Giving my body a rest right now otherwise I'd be outside working on it...

 

[Billwill]

The link below shows the installation instructions for adding Mopar fog lights.
http://site.justforjeeps.com/guide/82207998.pdf

In window 31 it shows the two WT-TN wires being plugged into the main plug
which in turn plugs into the left side of the multifunction switch.

What I am unclear with is, where do you plug in the two joined WT-TN wires?

Which receptacle?

Looks to me you take a wire out of plug position #2 and put the joined wires back into the same slot.:freak3:

 

[Ry' N Jen]

That's what I was thinking as well Bill.
But, when you look at the multi-function switch where the plug plugs into (on the multi-function switch with built in fog light switch) it has an extra pin connector present which isn't there in the non fog light switch multi-function switch.
I'll take some photos and post 'em up later tonight.
I don't want to plug it in as trying to unplug those little pin connectors is next to impossible.

 

[tjkj2002]

Most of these OEM add on kits are made to be a dealer installed item so in some cases very special tools are required.

To get those pins out easily without damage.............
Super price on Thexton 493 at ToolTopia.com

 

[04Liberty]

Yeah it took me awhile to figure that one out and it was a royal pain as I remember it.

 

[Ry' N Jen]

I'll have to tackle it tomorrow after I get out of the hospital

 

[TwoBobsKJ]

I'll have to tackle it tomorrow after I get out of the hospital

Take care of yourself, Ryan. :sorrysign:

Bob