Search results

02 3.7 first time it happened was a few weeks ago to my wife, then after a min or so it fired right up, no more problems till 3 days latter same thing, turn the key lights come on, but no noise, not trying to start, nothing I checked battery and connectors I figured it was the...

02 I had the compressor replaced for the locked up clutch about 3 years ago this past weekend went to turn ac on/ and it didn't get cold, I hooked up a refill gauge and it showed high pressure so I didn;t add any, the clutch never kicked on, I checked the fuses, and swapped still didnt work...

"I have already fixed but just letting anyone else know" I didn't have any problems with the jeep, but my wife called me and said the van got a check engine light, so I told her how to do the "key dance" which failed to work for her, so after long distance trouble shooting (she was 1000miles...

seems to be the dealer part from searching anyone put after market LED in and do you have the part number place you bought it, if I have to take the console out to replace I rather not have to do it again, thanks

noticed some coolant leaking today so I guess I will be putting a rad in, how hard it is on an 02 I guess I have to disconnect the trans cooler lines, what about the ac, does it need discharged first? thanks for any advice driver side/top of the rad, near the upper hose

was driving down the mountains out from Shenandoah National Park this weekend, and on the down hill the instant mpg would top out at 99mpg, not that I would ever get close to ave that since the up hill was around 8mpg but it was still nice to see the 99 for the few mins that it was locked in...

I first noticed this little drips of brownish(rusty) water last fall when I changed out the cv joint on the front driveshaft, the water comes on the inside of the heat shield, this pic was taken 4hrs after turning the jeep off just wondering if there is a weep hole in the exhaust above it...

any particular brand anyone recomends? I have a new/unopened tube of mopar atf rtv sealant that i am will be using for the transmission next month, will it work for gear oil? thanks for any suggestions anyone use one of these covers, price seems decent...

I just instaled one of the " There are some rare EVIC+PSI units that have both the PSI and Instant MPG functions" from a 300m, thanks to this forum, it looks great works perfectly, total cost was about 50$ 16.53 for the sensor, the wire was 5.04 the Evic was 28.59, 3.45 for the add a fuse...

should be an easy answer (I don't have the Jeep at home or I would Check) the inside fuse panel 02 what style fuse is it for the smaller fuses, it has been awhile since I opened it Low-Profile Mini APS Mini (guessing this) APM ATM Regular(don't think it is this) APR ATO ATC...

Picked one up on Ebay, Please Delete

I am going to be removing and cleaning the Throttle body next weekend, and while I was doing spark plugs yesterday I looked over the job, and I can see how every thing will come out, except for the speed control, from the fsm is says to pull the "bell crank Pin" not sure which part that is...

I am going to be replacing my high pressure hose soon, and I saw other members mention to replace the low pressure and return hose the return hose seems pretty straight forward, remove from power steering reserve and from cooler, reattach, using some screw clamps or such, at least I think...

I am going to be replacing the lower and upper radiator hoses I saw on a previous post that the hose sizes are http://www.jeepkj.com/forum/showthread.php?t=42384&highlight=lower+hose but when I squeaze the lower radiator hose I feel something hard like a spring, do I need to buy a new...

since I had never cleaned the throttle body before, i figured it might be best to remove it, so I can clean the back side of the plate better, my question when looknng at parts there are 5 gaskets listed on rockauto http://www.rockauto.com/catalog/x,carcode,1386862,parttype,6474 anyone...

not having any problems, I am going to do spark plugs again in 2 weeks, so I was wondering if there would be any reason to change the 02 sensors as PM thanks for any advice also if recommendations are to change them out, aftermarket sensors OK, or stick with dealer's sensors, thanks 02...

I have noticed that there is a bump/clunk sound that comes from the rear when letting off the gas,(not very loud) it does not do it when hitting the gas or costing, just when letting off of gas, it does not do it when shifting gears, so probably not transmission, only happens when releasing the...

today I was changing the oil, dropped the skids, changed front, then rear differential, then I dropped the transfer case skid to change its fluid, and I noticed thisthick circle of grease, looks like it got sprayed off of the front drive shaft where it connects to the transfercase, was there a...

anyone have the torque spec's for front diff drain plug I know the transfer case is 15-25ft/lbs, same question Thanks

I am looking for recommendations for what to replace when doing the serp belt I am getting the ac compressor/ A/C Accumulator/Drier / A/C Expansion Device as well as the vacuum and recharge so after replacing that I figure it would be a good time to replace the serp belt, is this fairly...