So my headlights decided not to work anymore. The brights only work if I hold the switch/toggle back. Foglights are working fine. If I turn the lights from the on position to off quicky, the marker light remain on? Also, an older issue, I get a tailgate open alert and the inside lights flash on...
So my headlights decided not to work anymore. The brights only work if I hold the switch/toggle back. Foglights are working fine. If I turn the lights from the on position to off quicky, the marker light remain on? Also, an older issue, I get a tailgate open alert and the inside lights flash on...
My doors only lock with the fob key. Door lock switches inside dont work and while driving, they click constanly like they are trying to lock. Any thoughts?
I have a DIY Frankie in the front and daystar 2.5 w/ bottom iso in the rear. The rear is about a inch lower than the front. I just bought a set of Rough country rear springs with 4 extra iso's in hopes of leveling it out. Opinions????
P.S. I know rough country sucks, but I got both springs for...
just wanted to say, I dont know how some of you are fitting 265's under your libs. I have almost 4 inches of lift, pounded pinch welds, and re-molded wheel wells and only clear by the skin of my teeth. Sure woulds like some 265"s though!
My 2003 jeep liberty renegade has had the clutch replaced twice due to chatter. When the clutch is not pressed its a noticable chatter. Even with a new clutch (pressure plates, throw out bearings, disc etc.) the chatter still exists and its driving me crazy. Mechanic claimed its just enginee...
I need to replace my clutch again, only after 3K (installer was a dumb shit). Anyways, looking for guidance on what brand clutch is best and any advice or things to look for during the process. This will be my first clutch repair and I want to do it right!
Just bought a Thrush Turbo muffler (17715) w/2.5" inlet/outlet and a 2.5" downpipe. My problem is both the muffler and turndown have a I.D.of 2.5" so I cant slip one over the other. Should I try to find a turndown with a O.D. of 2.5 instead or can I cut some slits in the muffler outlet and put...
Can I use a fob key from a newer liberty(the one that is the remote and key in one) or do I have to get the old style(without the key attached) for my 03?
I just picked up a Westin grille guard but Im not sure I have all the mounting hardware or exactly how to install. If anyone could post some pics of there westin installed, particularly the mounts, I would really appriciate it. Thanks
I found a great deal on an ARB rear bumper for a 07-10 JK Wrangler. Is it possible to fabricate to fit my 03 KJ, or would it be more work than its worth?
I replaced my clutch recently and now it's worse than the old one. I have grinding/growling noises when clutch is dis-engaged(first thing I noticed). Bad chatter between shifts, mostly in first, reverse, and during downshifts. And a general sloppy feeling(drivetrain feels loose). I also get a...
re-phrased question due to poor response?
Okay guru's. I though this is a simple question but lack of response tells me either my question is stupid or nobody really knows for sure.
I have:
daystar top strut plates(I DON'T have the stock plates)
OME 927's
RSX 17505
stock iso's
What...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.