Search results

  1. metalmoto

    Starts then dies

    Sounds like an intermittent problem with the transponder in the key. If you check your codes, it will show up.
  2. metalmoto

    Gear Shift Bulb

    Red lens across the PRNDL Something broke loose inside mine. Not even sure how is was before... But now there is a red lens going across the ND at an anglekopkrab.gif I don't really care, but it just looks crappy. I guess I'll have to pull it apart, and see what happened, broke off in there...
  3. metalmoto

    OEM front skid plate swap

    Just wanted to let everyone know. That the OEM front skid plate from an 02' will fit perfectly onto a 04'. As I just got around to swapping mine from my dead 02' onto my alive 04'. Just a word of warning... The original bolts will work fine on the front of the skid plate, but the rear ones wont...
  4. metalmoto

    Tire Pressure

    I was wrong about the numbers on the dash board, Sorry! And as I've been researching, I agree, my Primewell tires are crap. But at the time, that was the best I could afford to buy. I was unemployed for 2 years. I had to change careers, and start at the bottom. So I wasn't making much money at...
  5. metalmoto

    Rup Rup sound from the front right wheel

    Not the wheel bearings or brakes I replaced the brake disc and pads first. Didn't make a difference. I just jacked her up (it finally quit raining) and the front wheels don't wiggle at all. So not a wheel bearing... Although, when I rotate the right front wheel, I hear a noise, from the...
  6. metalmoto

    Rup Rup sound from the front right wheel

    After some research. It sounds like a bad wheel bearing. Need to jack it up, and try rocking the wheel. I hope it's something I can do myself?
  7. metalmoto

    Rup Rup sound from the front right wheel

    Thank You for your reply. How do I go about checking the CV joints for problems? I don't see any obvious rips in the boots. The only experience I have with them, was years ago with a ripped open boot on a 81' Ford Escort. In that case, it was an old car. And I cut off the boot, cleaned out all...
  8. metalmoto

    Tire Pressure

    Just below the gauge on my dashboard, on both my 02' and 04', in tiny red letters, is says "TP 35" I assumed this is a throwback from the military Jeeps... Where it states the tire pressure. I've seen it on Post Office vehicles, usually printed on the wheel well, just above the tires. And I've...
  9. metalmoto

    Aftermarket gauges...

    Hi, I was wanting to install an aftermarket temp gauge. Since the dash gauge has let me down, "big time" before! My 02' overheated, dropped a valve,:flame: and now I am stripping her for spare parts, for my 04'. Don't want this to happen again! I have a mechanical (not electric) gauge I'd like...
  10. metalmoto

    Rup Rup sound from the front right wheel

    Hi, this sound has been bugging me, ever since I bought my 04" KJ. Sounds like it's coming from the front right wheel. And it's much louder, noticeable when braking... OK, so then I replaced the brake rotor, and pads, with almost brand new ones, that I took off my 02" with a blown motor. The...
  11. metalmoto

    Tire Pressure

    I find it odd, that the tire pressure (on the tiny letters, below the speedometer) says 35, but the sticker on the drivers side door says 32 PSI. My tires are fairly new, not the best brand.. All I could afford, are "Primewell". On a "particular" road, on my drive to work. The brakes will lock...
  12. metalmoto

    Intake Resonator

    Thanks for your replies! I am parting out my 02' for spare parts, as the engine is blown. So if anyone wants or needs the resonator and hose. Just let me know?
  13. metalmoto

    Metal flap inside gas filler missing?

    Thanks for your replies. My flap must of broke off, and fell into the gas tank. I don't think it would cause any issues. But I have to be careful, when filling my tank. As if I try to put a few more cents of gas into it, after the pump automatically shuts off. Some gas spills out onto the...
  14. metalmoto

    Intake Resonator

    I noticed my 02' KJ has an air intake resonator, but my 04" KJ does not. What does the resonator do? And why did the remove it on later models?
  15. metalmoto

    Metal flap inside gas filler missing?

    I noticed the metal flap inside my gas tank filler neck is missing. It's missing from my 04' KJ. But my 02' KJ still has the metal flap intact. Did it break off, and fall down into the gas tank? Or did they simply omit this flap from the later year models? Can somebody check? Remove your gas...
  16. metalmoto

    Roof racks

    Someone gave me a Yakima roof basket. Not sure what truck it was made for. But then I realized, I would need cross bars, to mount it. I probably will never use the roof basket. I was just looking for a way to bring home a few pieces of 4 by 8 plywood, from the Home Depot. Without messing up or...
  17. metalmoto

    04' PCV tube broken at T fitting HELP

    OK, if it's not the PCV hose. What do you call it? It's starts at the air cleaner, goes through a T fitting, then to both valve covers, near the firewall. The part I bought looks like the third picture posted by conundrum above. Except the new hose doesn't have those two black things, with the...
  18. metalmoto

    04' PCV tube broken at T fitting HELP

    I just pulled the hose off, and it seems to have 2 check valves. Where my new part has no check valves at all. And the check valves are molded or glued to the hard plastic hose. They have arrows on them, so I assume they are check valves, allowing gasses to only flow in one direction. My only...
  19. metalmoto

    04' PCV tube broken at T fitting HELP

    Hi, Not the hose on the filler neck. But the third hose you have pictured. But mine has a black check valve or something connected to the plastic pipe. My new part doesn't have this valve part on it. I am thinking of just cutting the plastic pipe, and using a piece of heater hose, to splice it...
  20. metalmoto

    04' PCV tube broken at T fitting HELP

    I broke the plastic pipe at the T fitting. It all seems glued together. I ordered another whole tube, but this does not have the check valves included. Probably bought the wrong one, even though the diagram looked the same. I wish I knew how to attach photos here.. I am thinking that I might be...

Random media

Red Cone Pass 9.1.14
2
Liberty 08 AC Clutch
IMG 1099
New Mexico 2013
My first Jeep!
1233.jpg
04, jeep liberty limited edition 3.7
Valve is clean and un scratched

Latest posts

Members online

Total: 317 (members: 2, guests: 315)
Top