Recent content by polomaan

Thinking of purchasing a lightly used 2011 grand Cherokee Laredo. Love the kj but would prefer less miles. Anybody driven one? Opinions?

You can get an amp that accepts speaker level inputs. I put my amp under the driver seat, and spliced into the rear driver side speaker wire for connection to the amp. If you do this, you don't need to run the giganto power cable too far...just through that little hole in the firewall under...

The lib is light, but has a good amt of tourque...so the back wheels spin if not careful (especially in the rain). So, now I have two jacked up up back tires that are kinda bald due to the spinning durning winter and needing allignment. Went to replace the back two, and found that if I use 4WD...

They work great. I've had some funny wear with the General Grabber AT2's, but that's prob because I need an allignment, and maybe overinflated... http://www.jeepkj.com/forum/showthread.php?t=30356&highlight=polomaan

You have my JEEP!

Are these both the same part? Is this what I need? Kragen is local so that'd be easy to pick up. Thanks http://www.autopartswarehouse.com/details/QQJeepQQLibertyQQReplacementQQPressure_SenderQQ2005QQREPC311403.html?apwcid=P1135867996W43b3f85c7ab9e&gan=1...

no idea what you're talkin' bout... ;)

Sounds like a good diagnosis. The movement in the belt (like a plucked guitar string) only happens between the tensioner pulley and the AC pulley. The belt looks tight everywhere else. Does that change anything? Thanks for the great help.

thanks, i'll edit

Will do tomorrow! ...I checked the oil though and I'm good. I haven't seen any drops in the garage either.

I'll do the best I can to explain this... When I press the gas from a stop I get a loud fast racheting noise from under the hood. It goes away in just a second. It also does it when i slow to a stop (again, for just a second). It also does it when i hit the gas when my kj is in park. I've...

I'm not too familiar with what the sender is, or how to replace it. Same thing with where the sensor is located. I did notice that there seems to be oil that has leaked just above where the oil filter is (when looking down into the engine from above). Is the sender something that is pretty...

About 1 of 10 times I start my jeep, my oil light turns on and stays on. I immediately stop, and turn the engine off. Then I restart the engine and the oil light doesn't come on at all. Bad sensor? Important to have checked out? There's plenty of oil, I have checked numerous times.

Thanks for all of the replys! I'm going to attempt to replace the alternator tonight (see previous thread to see what I ended up going with). Maybe I'll find an alternator replacement thread...or start one

Bought a used one on ebay. It supposedly came out of a lib with 21k miles on it. Came with a lifetime warranty and free shipping for a whopping $40. Figured I couldn't go wrong.