What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TorrentIV

A Leaf on the Wind
Joined
May 22, 2014
Messages
120
Reaction score
31
Location
Central Texas
Oil n filter changed, water pump, thermostat, lower hose all changed and I think most of the air is out, sitting a lil below half on the gauge.... discovered the tensioner is dying, anyone ever have their lower pulley misalign? Starting to rub a bit. Also got a welder to learn with, gonna try it out on the hitchbasket.
 

TorrentIV

A Leaf on the Wind
Joined
May 22, 2014
Messages
120
Reaction score
31
Location
Central Texas
Just ordered a third set of Rear Lower Control Arms for Jeep Grand Cherokee WJ 1999-2004, ( Adjustable Control Arms )
Length Adjustable Range: 17''- 20'', all in my family of KJs will have them now ;)
Happen to have a part number or link? I believe mine are going out soon.
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,324
Reaction score
1,115
Location
NJ
towed the 4x8 trailer with some tree trunks on it.
 

Doing10to20

Full Access Member
Joined
Apr 23, 2020
Messages
297
Reaction score
482
You must be registered for see images attach
You must be registered for see images attach


Went looking for an old abandoned mine..we found it,pretty cool actually...great day out in the desert
 

TorrentIV

A Leaf on the Wind
Joined
May 22, 2014
Messages
120
Reaction score
31
Location
Central Texas
I would love to as well, ordered them 14 days ago and still MIA, about ready to stop payment and find someone else or build my own
Shipping on a lot of things has been pretty bad....got my thermostat yesterday. Already replaced everything and got a store one Saturday waiting on this to arrive. Had to get to work yesterday so there's that.
 

Slugger103

Member
Joined
Sep 16, 2020
Messages
67
Reaction score
66
Location
SC
Removed the serpentine belt & tensioner, removed upper & lower radiator hoses, removed the cowl between the hood & windshield to clean underneath & reseal the air intake, removed the front passenger & rear seat to pull up the carpet to start drying it out (water leak at front passenger door seal). New parts going in tomorrow.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Ran out to get gas for mower just a few minutes ago.
Guy at other pump says my Dad has one of them out behind the garage
Me "WHAT, WHERE, WHATS WRONG, HOW MUCH ?????"
He told me motor starting missing bad so they just parked it since they didn't know how to work on "cars" and it never did have any power on hills around here.
So follow him out , start looking and yep "another 4 cylinder" , doors good , back gate has been hit but overall good except for motor and the gate
So another one to add to the pile of KJs when I get the time to go get it ;)
 

lfhoward

Well-Known Member
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,243
Reaction score
2,425
Location
Philadelphia, PA
^^^^ There’s another set of 4.10’s.

I’m a little jealous of how easy it is to find a set of 4.10’s if you have a KJ. The KK’s never came with them.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
I have yet to even see a 4 cylinder one in person. Must not have been too popular in Idaho
I have only seen two , fully intact 4 cylinders , rest were just the diffs
well three actually , seen third one the day it was going to the crusher , guy already had diffs, transfer case , out, well all the good stuff
2 of them came from South Carolina and Georgia , not sure of the history of todays find
Very underpowered so not many sold really
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,324
Reaction score
1,115
Location
NJ
Ran out to get gas for mower just a few minutes ago.
Guy at other pump says my Dad has one of them out behind the garage
Me "WHAT, WHERE, WHATS WRONG, HOW MUCH ?????"
He told me motor starting missing bad so they just parked it since they didn't know how to work on "cars" and it never did have any power on hills around here.
So follow him out , start looking and yep "another 4 cylinder" , doors good , back gate has been hit but overall good except for motor and the gate
So another one to add to the pile of KJs when I get the time to go get it ;)
what year?
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,324
Reaction score
1,115
Location
NJ
^^^^ There’s another set of 4.10’s.

I’m a little jealous of how easy it is to find a set of 4.10’s if you have a KJ. The KK’s never came with them.

I'm still on the fence about going to 4.10 or 3.73 from 3.55.

Code:
final  3.55                  @3k   | 3.73       | 4.1
gear   ratio   total    mph  shift | total  mph | total  mph
1      4.46    15.83   17    3000  | 16.64  16  | 18.29  14
2      2.61    9.27    28    1756  |  9.74  27  | 10.70  25
3      1.72    6.11    43    1977  |  6.42  41  | 7.05   37
4      1.25    4.44    59    2180  |  4.66  56  | 5.73   51
5         1    3.55    74    2400  |  3.73  71  | 4.10   64
6      0.84    2.98    89    2520  |  3.13  84  | 3.44   76
TG @ 60mph                   2044  |      2147  |      2360
245/70R16 correction         2030  |      2132  |      2343
235/75R16 correction         2002  |      2103  |      2312
245/75R16 correction         1964  |      2063  |      2268

so the question is: based on all of that... what final drive and what tire size, considering iTow (with one of the aforementioned sizes) and iPlow (with 225/75R16 studded snow tires), but don't want to totally ****** my already meh fuel economy when i'm not doing either of those things. (17.694 mpg lifetime average.) I'm getting new tires in the spring, after the snow season is over.

one thing I'm noticing is, I'd probably would skip shift a LOT less with 4.10. with 3.55 i'm frequently 3-6 and 4-6 shifting when getting up to highway speeds (~65mph), and i'm very curious if 4.10 would almost elminate the need to start in 1st most of the time. as it is I start off in 2nd any time I'm pointed down hill and I can roll for a second before engaging the clutch. even on flats 1st with 3.55 is annoying as it always feels like it's too short for me only takeoffs, and 2nd is too tall where I feel like i'm abusing the clutch.

oh jedi master @tommudd what say you! :D

eta: i'm leaning towards going nuts, and doing 245/75R16 and 4.10
 
Last edited:

Latest posts

Members online

Top