What did you do to your jeep today?
- Thread starter TheQ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Up on the lift first thing this AM...
Getting some slight play on passenger side inner rod/kanuckle. Other side tight.
Will let it slide for a while and replace it next year...
Lubed the Upper A-Arms.
53588[/ATTACH]"]
Looks like some rusty areas need addressing...U-joints still ok.
I guess I scraped off whatever undercoating was along the bottom of rear diff.:icon_lol:
53590[/ATTACH]"]
Time for some touch ups and where the ? mark is- off the tri link..
I only noticed it in photo, is this a ground strap? If so it's Rusting good.
53592[/ATTACH]"]
No leaks anywhere on outputs and cases, even oil pan still good.
arty52:
53594[/ATTACH]"]
PML Trans pan dry as a whistle!!
53596[/ATTACH]"]
Anyways, got it also aligned today, passenger side toe was out. Drive great now!:gr_grin:
Tomorrow onto a detailer for hood cut polish, to get some :favorites68:water stains hopefully out.:emotions34:
Getting some slight play on passenger side inner rod/kanuckle. Other side tight.
Will let it slide for a while and replace it next year...
Lubed the Upper A-Arms.
53588[/ATTACH]"]
You must be registered for see images attach
Looks like some rusty areas need addressing...U-joints still ok.
I guess I scraped off whatever undercoating was along the bottom of rear diff.:icon_lol:
53590[/ATTACH]"]
You must be registered for see images attach
Time for some touch ups and where the ? mark is- off the tri link..
I only noticed it in photo, is this a ground strap? If so it's Rusting good.
53592[/ATTACH]"]
You must be registered for see images attach
No leaks anywhere on outputs and cases, even oil pan still good.
arty52:53594[/ATTACH]"]
You must be registered for see images attach
PML Trans pan dry as a whistle!!
53596[/ATTACH]"]
You must be registered for see images attach
Anyways, got it also aligned today, passenger side toe was out. Drive great now!:gr_grin:
Tomorrow onto a detailer for hood cut polish, to get some :favorites68:water stains hopefully out.:emotions34:
Attachments
BorincanoKJ
Full Access Member
JBergun nice detail of the blue color on the dif. cover. :headbang:
I had my Crane diff cover all nicely painted for a while, now its just paint over the whole thing 2-3 times a year with the rest of the undercarriage and move on.
But yours looks good now.......:icon_lol:
Thanks guys i am going to keep clear coating here and there to protect the detail next year when i pop it off lay some more blue i did this by hand so if i really wanted i could get under there with the can and artist brush.
Last edited:
Up on the lift first thing this AM...
Getting some slight play on passenger side inner rod/kanuckle. Other side tight.
Will let it slide for a while and replace it next year...
Lubed the Upper A-Arms.
53611[/ATTACH]"]You must be registered for see images attach
Looks like some rusty areas need addressing...U-joints still ok.
I guess I scraped off whatever undercoating was along the bottom of rear diff.:icon_lol:
53613[/ATTACH]"]You must be registered for see images attach
Time for some touch ups and where the ? mark is- off the tri link..
I only noticed it in photo, is this a ground strap? If so it's Rusting good.
53615[/ATTACH]"]You must be registered for see images attach
No leaks anywhere on outputs and cases, even oil pan still good.
53617[/ATTACH]"]You must be registered for see images attach
PML Trans pan dry as a whistle!!
53619[/ATTACH]"]You must be registered for see images attach
Anyways, got it also aligned today, passenger side toe was out. Drive great now!:gr_grin:
Tomorrow onto a detailer for hood cut polish, to get some :favorites68:water stains hopefully out.:emotions34:
Undercarriage need some love get a mask and a rattle can take the ol jeep outside somewhere away from other cars and go crazy. Usually good to wait for a not so windy day as well. I did flat gloss hammered tried the rubberized under coating in a small spot. I like the gloss cleans easy and looks better longer.
Attachments
BorincanoKJ
Full Access Member
JeepinLab I like the matches with the license plate and the red color of the lower control arms. I have thought about doing the same thing these days.
KJ604
Full Access Member
Ordered micro switch for tailgate glass and pinion shaft bolt for swapping out the rear axle.
CzarKJ
Full Access Member
Saw my first pure white limited KJ today! Also put another coat of paint on my D-Rings
TwoBobsKJ
Full Access Member
What color on the D-Rings?
CzarKJ
Full Access Member
John3seventeen
Full Access Member
What hue of pink is that?
CzarKJ
Full Access Member
Jim McClain
Full Access Member
Not a big day of doin' for me today. I did change my antenna - got a short billet one coated black.
Tomorrow I take it in for my first oil change. I got Mobil 1 Extended Performance 5w-30 and Napa Gold oil and air filters. I got a Dimple Magnetic Drain Plug (and will add another to the ****** pan next month). And I received the Skid Row transfer case skid plate today, but not sure if I'll get that installed tomorrow.
Jim
Tomorrow I take it in for my first oil change. I got Mobil 1 Extended Performance 5w-30 and Napa Gold oil and air filters. I got a Dimple Magnetic Drain Plug (and will add another to the ****** pan next month). And I received the Skid Row transfer case skid plate today, but not sure if I'll get that installed tomorrow.
Jim
the_dealer
Full Access Member
Took about 3 hrs from the time I started cutting until temporarily wiring it up. Box isn't nearly as big as the picture makes it seem.
Room for groceries
There wasn't nearly as much loss in output I expect by going from 3 10's to a single 12. It's almost just as loud, but the most noticeable thing was a huge improvement in sound quality. I'm pretty happy with it. Still have to add lug terminals, do a little sanding, and cover it.
Also working on a box almost 3 times as small that will use an external aero port made from 6" pvc. After paying what I did for 4ft of 6" pvc, I decided to do some practice runs with some 3" pvc I had laying around. This wasn't cut square, so it caused it flare lopsided
Started screwing around with my X4700BHS. People think it's factory when I'm rocking the Kj theme. I have a ton of Jeep themes that will work for most any pioneer and Kenwood screens if anybody wants them
Night time display
... and since they're actually winning for a change, I had to make a Game Day mode. Makes me think of the many generous donations i made to the local drinking establishments while attending UGA.
Night time display
Sent from my G870a on 38's.
You must be registered for see images
Room for groceries
You must be registered for see images
There wasn't nearly as much loss in output I expect by going from 3 10's to a single 12. It's almost just as loud, but the most noticeable thing was a huge improvement in sound quality. I'm pretty happy with it. Still have to add lug terminals, do a little sanding, and cover it.
Also working on a box almost 3 times as small that will use an external aero port made from 6" pvc. After paying what I did for 4ft of 6" pvc, I decided to do some practice runs with some 3" pvc I had laying around. This wasn't cut square, so it caused it flare lopsided
You must be registered for see images
Started screwing around with my X4700BHS. People think it's factory when I'm rocking the Kj theme. I have a ton of Jeep themes that will work for most any pioneer and Kenwood screens if anybody wants them
You must be registered for see images
Night time display
You must be registered for see images
... and since they're actually winning for a change, I had to make a Game Day mode. Makes me think of the many generous donations i made to the local drinking establishments while attending UGA.
You must be registered for see images
Night time display
You must be registered for see images
Sent from my G870a on 38's.
TwoBobsKJ
Full Access Member
Those are sweet backgrounds! I have a Pioneer AVH-X3600BHS; would those backgrounds work on that head unit?
I have a Jeep logo as the background now but I'm getting bored with it. If your offer stands I'll take you up on it
arty52:Nice work on the sub box - some nice low end thump, eh?
Bob
Similar threads
