tommudd
Moderator
After posting 1000s of picture since 2004, Photobucket did me in on that , have pics but haven't posted anything on the forums for a long time now
so...............I'll GTFO now
What did you do to your jeep today?
- Thread starter TheQ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
After posting 1000s of picture since 2004, Photobucket did me in on that , have pics but haven't posted anything on the forums for a long time now
so...............I'll GTFO now
Aceofspades
Full Access Member
Same here. I’ve moved on to google then imgur
Past couple and today
My radiator picked a good time to develop a pin hole. Tried patching with some JB but it didn't hold long. So in 27F and a light snow I replaced it. Also in the past week:
New LED reverse light on the right
https://i.imgur.com/4Y3Z3RA.jpg
65w fog on the passenger
https://i.imgur.com/HSD838a.jpg
New Radiator (before the snow)
https://i.imgur.com/csNKnpK.jpg
My radiator picked a good time to develop a pin hole. Tried patching with some JB but it didn't hold long. So in 27F and a light snow I replaced it. Also in the past week:
New LED reverse light on the right
https://i.imgur.com/4Y3Z3RA.jpg
65w fog on the passenger
https://i.imgur.com/HSD838a.jpg
New Radiator (before the snow)
https://i.imgur.com/csNKnpK.jpg
Samsolo49
Member
I have to get my head rebuilt, standard cylinder 2 malfunction. Now I'm stuck driving my truck till it's fixed
Sent from my Moto Z (2) using Tapatalk
Sent from my Moto Z (2) using Tapatalk
ltd02
Comfortably numb
I've heard good things about them. I was looking at them when I got my Continentals. I would have gone that route too but couldn't wait a few days and the CrossContacts were heavily discounted. Maybe next time.
profdlp
Circling The Drain
Lots of us Jeepers are in that situation. :Insane:
I wonder if he really needs the head rebuilt or did it just drop the rocker?
ltd02
Comfortably numb
I've been told I need my head rebuilt because I'm off my rocker... :gr_grin:
Moved my KJ around so I can work on other stuff.
Charlesthe2nd
Full Access Member
Been a bit since I've used the Jeep for some real work. Yesterday I hauled a 5000 gal water reservoir to our new property, and then a couple more runs of equipment on the 20' flatbed. As always, the little mule did all I asked of her.
Later that afternoon I was pulling and collecting t-posts when the tractor slipped a bead. Had about 100+ 8 footers on there when it happened so no chance of limping it to the barn. Drove the Jeep through however deep the snow is here in Maine, and used the ARB air compressor to fill the tire up. I can't even count the number of times I've used that air compressor, so dang convenient.
Later that afternoon I was pulling and collecting t-posts when the tractor slipped a bead. Had about 100+ 8 footers on there when it happened so no chance of limping it to the barn. Drove the Jeep through however deep the snow is here in Maine, and used the ARB air compressor to fill the tire up. I can't even count the number of times I've used that air compressor, so dang convenient.
Last edited:
turblediesel
memberable
Finally found the sockets I need to un-streach my headbolts. 11mm Is a goofy size for a headbolt. ARP VW studs going in soon to pass on the blown headgasket experience.
Rockers have been off for quite some time. Replacement rockers await.
Rockers have been off for quite some time. Replacement rockers await.
Samsolo49
Member
It's is the rocker issue, but want to make it so it won't happen again
Sent from my Moto Z (2) using Tapatalk
Sent from my Moto Z (2) using Tapatalk
jeeper03
Full Access Member
My new tires showed up this past weekend. Decided on cooper stt pro after talking with a couple local club members who have them and looking at reviews. Now just need downtime at work to mount and balance.
Sent from my iPhone using Tapatalk
You must be registered for see images attach
Sent from my iPhone using Tapatalk
Gyro
Full Access Member
Aceofspades
Full Access Member
I wanted these badly for the 02. One year I’ll have to splurge on new wheels to mount them to. The stockers really limits me
jeeper03
Full Access Member
I got 5 the 5th was up against the Jeep next to the old tire :happy175:
Damotee
Full Access Member
Im getting a P0100 Mass airflow code as well as a P0400 Exhaust Gas Recirculation Flow Malfunction code, so I bought a new MAP sensor. Hopefully this sorts it out.
We don't even have EGR valves...at least the US ones don't.
Ordered new front brakes (Centric rotors, Wagner Thermoquiet ceramic pads) and new sway bar bushings (Mevotech Supreme...Moog ones are junk so figured try these for $6).
Ordered new front brakes (Centric rotors, Wagner Thermoquiet ceramic pads) and new sway bar bushings (Mevotech Supreme...Moog ones are junk so figured try these for $6).
Similar threads
