lift

  1. joooooooooop

    New Jop, what should I do to it next?

    Hello everyone. I just picked up a 06 KJ a few months ago in SE Michigan. Only 75k miles but still predictably rusty. Already spent more than I paid for it on rust related repairs, but its mostly fine now (apart from some knocking in the steering and seized handbrake). Just got Toyo Open...
  2. LucasD

    Actual downsides to spacer lift

    So I know there are some controversies over using spacer lifts, however i can never seem to find why. All I see is buy OME. I don't have the money to get an expensive lift and all that right now but a $100 spacer lift isn't that bad. I'm not trying to get the best and most capable kj out there...
  3. Hlk0622

    Parts help

    I have a 06 kj lifted 2.5 or 3 inches and I have 265 75 16s on right now. Iv had problems with my ball joints falling out OFTEN I know there is recalls and it’s a common problem. I just replaced my front diff because it went out and while it’s apart I am about to replace the upper control arms...
  4. A

    Total newbie - help with my first lift…

    I'm about to buy my first 4x4, a 2008 kk limited which I believe is stock, with 18" rims (looks like an 18"). I have a lot of questions about a lot of things (sorry if I missed that info on other topics): 1. The Rough Country's 2.5-inch Leveling Lift kit can be assembled in my garage or do I...
  5. R

    Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16

    I recently purchased a 2011 and have been stocking the parts to get it lifted with new tires. Just want to make sure I got everything I need. I got the ome springs and bilstein shocks(see pics) Also got the jba upper control arms and the front bump stops from terraflex part number 1903200. I got...
  6. 0A0EC367-709F-4B71-97DB-5F6297126B46.jpeg

    0A0EC367-709F-4B71-97DB-5F6297126B46.jpeg

    Wheels down and locked.
    • klc
    • Media item
    • lift old man emu
    • Comments: 0
    • Album: The BatCar
  7. EC860695-BC03-4D38-81B0-29B50E070F70.jpeg

    EC860695-BC03-4D38-81B0-29B50E070F70.jpeg

    Starboard.
    • klc
    • Media item
    • lift
    • Comments: 0
    • Album: The BatCar
  8. 412108C5-1500-4654-A3E4-18740B181437.jpeg

    412108C5-1500-4654-A3E4-18740B181437.jpeg

    Port side.
    • klc
    • Media item
    • lift
    • Comments: 0
    • Album: The BatCar
  9. D3B67A25-1F30-400F-9EFA-6FEB5721C2E1.jpeg

    D3B67A25-1F30-400F-9EFA-6FEB5721C2E1.jpeg

    Getting its’ Wegs wifted.
    • klc
    • Media item
    • lift
    • Comments: 0
    • Album: The BatCar
  10. Mi Jeep es una Dragona

    Using Bilstein shock extensions in front

    Hi everyone from Mexico! I have a 06 liberty lifted with RC kit, please don't throw hate, here we don't have many options and the cost of a Skyjacker it's prohibitive right now, I'm saving for a SAS However, I need to replace my front shocks, and ordered the Bilstein 4600, but I wish to...
  11. blaizemarshall

    KK front lift struts on KJ?

    I have been doing some digging as one does when they are considering lifting their Jeep. I do not want to go the cheap spacer route as I understand the damage it does to the related components, and I am also not wanting to break the bank on OME and Bilstein equipment as I couldn't justify the...
  12. J

    265/70/16s or 245/75/16s

    Hello, Just got myself a set of 5 MOAB rims from a TJ (with one 245/75/16 Duratrac MTRs as the spare from the previous owner). Currently I have 235/75/16s and it didn’t rub when it was stock, and still doesn’t rub after installing the 2” BDS lift. I’m looking at 265/75/16 tires but wanted an...
    • Jay D
    • Thread
    • bds jeep tj kj moab lift moab rims tires tommudd wheel wheels
    • Replies: 16
    • Forum: Tires / Wheels
  13. L

    Lift Advice

    Hey all, Pretty new to the forums but have had my 2003 liberty for 4 years now. I currently have RRO's rockfather lift kit with OME components and their own "under the top" spacers to make 3 inches of lift paired with JBA's UCAs. My question that I'm hoping someone here could help with is I'm...
  14. B

    SEARCHING FOR **JBA Y link extension**

    Hey guys I’ve been running my Jeep Liberty as a mud toy for work when it’s too muddy for my truck. I’ve always ran it with a 3” lift but just today I installed an additional 2” of lift in the rear just to stop mud from balling up so much. I put it all back together and found that there’s an...
  15. 1

    Rims and Tires

    Hi All, New Here. I think I originally put this in the wrong place. I Just started working on a 2005 limited and wanted to know if I can switch from the stock 17" rims to 15" so I can get the tires I want (Cooper 30/9.5R15 Disc. STT Pro)without modifying anything or what you all might...
  16. huntert98

    KK 4" Rear Lift Springs (kind-of)

    Hey guys, I figured it would be of use to someone to know that I have found a decent alternative for 4" rear springs since nobody advertises them anymore First off, gotta give OME credit. I had no idea they had an applications catalog with all their spring specs in it :D Here's a link to it...
  17. C

    What am i missing to lift my 06 KJ Renegade.

    Hey Y'all. Thanks so much for the knowledge you've bestowed upon me. It's been great so far. I feel like i'm missing or forgetting something, and would appreciate some help. ARB 2927/2948's for Springs (OME's) (2x each) JBA A arms Adjustable Bilstien 24-282642 (front) (2x) Adjustable Bilstien...
  18. R

    Getting Started With Lifting... (2011 Liberty KK)

    BEFORE WE GET STARTED: I’ll be driving this vehicle across the country (~3000mi) with about 300lbs worth of workout equipment in the car... will these specs be suitable?) I don’t necessarily want to lift my suspension, but according to everyone here (namely tommudd,) it’ll be the biproduct of...
  19. R

    Combining Lifts?

    Hello everyone, this is my first time ever posting on this forum and I'm sorry if this is something that has been asked before, but I am wondering about combining two different lift kits. I drive a 2006 Liberty Sport 4x4 and currently have a 2 inch BDS Suspension Lift on it. Pictures of both the...
  20. D

    Help on planning a KJ lift and tire combo

    Hey, new member here, I would like some help on seeing what lift kit I need if I want to run 265/75/r16 31x10.5 in tires on the Moab rims. Mostly looking for what size suspension lift in inches I would need, but suggestions would be great as well. If this combo isn’t possible without cutting I...

Random media

IMAG1000
IMG00004 20090404 1014
SL272804
Up font
The beginning
dome light cutout
018
First cool bit bolted on. They make you drill holes and stuff, too much fun...
Jeep 1

Latest posts

Members online

No members online now.
Total: 300 (members: 0, guests: 300)
Top