03 KJ Gal
New Member
I have an 03 liberty sport 4wd 3.7 I have a plug and play TCM that has been programmed to my vin number. I’ve looked for hours trying to find a video or someone who knows how to take this thing off. PLEASE HELP
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thank you!!!! What a relief. I was beginning to think I’d never be able to do this myself. A million thanks!!!Went out and looked at my ‘02. It appears the TCM stays on the black panel it’s mounted on until the whole assembly is removed by taking two nuts off in the front of the black panel. You’ll see two studs at the front where the nuts are.
There are four clips on the large plug that will be GENTLY prised up until they release. Be very careful not to snap them. The whole assembly then slides forward and out.
Use dielectric grease in the plug when reassembling the unit. It’ll help prevent corrosion in the plug.
Assembly is the reverse.
HTHs!