This jeep has sat up about three years. I’ve replaced the key cycle and keys. The keys that were replaced I had programmed. The reason for this is because I was told It was a key problem. When I turn the key everything comes on like it should(fuel pump, dash lights, etc) but no crank. Antitheft light comes one and goes off like it should so I know the is recognized. I’ve checked the ignition actuator and it’s not broken.
I’ve tried to start it while in neutral it see if it was the neutral safety switch but still no crank.
When I pull the starter relay and jump it the jeep cranks but still no start.
I have no idea what’s going on! Please help!
I’ve tried to start it while in neutral it see if it was the neutral safety switch but still no crank.
When I pull the starter relay and jump it the jeep cranks but still no start.
I have no idea what’s going on! Please help!
