I am trying to wrap my head around how to mount the skids set + what hardware is required. Wanna make sure I got all the correct items before I begin so got a bunch of questions, bear with me:
according to this:
You must be registered for see images attach
Easiest thing is the fuel tank skid - 6 x M12 bolts, done. OK..
Now tcase and engine skids:
You must be registered for see images attach
---
You must be registered for see images attach
For the engine skid according to list I need
(a) 1 x M10x1.5x30 (but the drawings shows 3!!) - whats true?
(b) drawing shows I need a bracket of some kind that I do not have (circled in red) - MOPAR PN# 52128544AA - do I need the right or left version (ends with 5AA instead) or nothing at all? if nothing that how does it mount on that point?
For the tcase skid I need:
1 x M10x1.5x30
1 x rivet
(c) or is it rivnut / nutzert? is it all the same thing? only one?! tomm said two, drawing shows one.. I'm at lost here.
(d) some kind of tool required to put the rivet in? which? tried looking for that tool PN - it's out of stock everywhere. Is it for drilling the cross-member?? if so how do I drill this thick steel and with what diameter?
(e) Does the M10 screw into the rivet? Is it a rivet with an internal thread? I looked on the undercarriage but not sure I am clear on this. only one M10 bolt is needed for the whole tcase skid?!
(f) Is there a recommended order for installation - tcase first and engine second or vice versa?
(g) if one day I get the transmission skid, will I be able to mount it or it'll require removal of the tcase/engine skids first?