M10x1.5 rivet nut extra available

[uss2defiant]

M10x1.5 bolt and rivet nut extra available

I have extras if anyone need them.

Updated info:

M10 × 1.5—Head: Wd. 15 mm, Ht. 10.4 mm
Product Detail
Class 10.9 Steel Flange Head Cap Screw, M10 Thread, 1.5mm Pitch, 35mm Long, Fully Threaded
McMaster-Carr


Product Detail
Zinc-Plated Steel Heavy-Duty Rivet Nut, Open End, M10x1.50 Interior Thread, .7-3.8mm Material Thickness
McMaster-Carr

 

[uss2defiant]

bump

 

[Jo6pak]

Is that the size for skidplates?

 

[uss2defiant]

yup.
that's what's on the part fiche and I also measured it.

The transfer case bolts are 35mm compared to 30mm with the engine skid.
I am looking to purchase the 35mm

 

[Jo6pak]

Sorry for the late reply.
I'd be interested in a few if you have extras. I'll need them if I ever track down a front skid plate for cheap.

 

[Leeann]

Just be aware that the McMaster-Carr ones only have knurls on the outside; they're not the half-hex that the Mopar rivnuts are.

Half-hex like the Mopar rivnuts are available here:
Half Hex Body Large Flange Rivet Nut - RN101538SLX | Half Hex Body Large Flange Rivet Nut

 

[uss2defiant]

yup. I do realize that.
I will be ordering a half hex replacement from avondalewholesaleparts.com, however, I need to drill two holes in the cross member and half hex wont work with that.

 

[Leeann]

Just making sure

 

[uss2defiant]

Just making sure

Thanks!

 

[Jo6pak]

Thanks for the heads-up Leeann. I would need the hex style....but jeez, I don't need 100 of them:shrug:

 

[Leeann]

Yeah, no one does. I bought mine at my local Jeep dealer.

 

[uss2defiant]

order one from avondalewholesaleparts.com, I think it was around $3.

 

[uss2defiant]

Thanks for the heads-up Leeann. I would need the hex style....but jeez, I don't need 100 of them:shrug:

Do you need any non hex style rivet nuts? I'm adding a ****** skid plate so I need to add some rivet nuts to my cross member.

The MOPAR part number is 6505294AA for their rivet nuts.

 

[Jo6pak]

Thanks for the MOPAR number.(biggthumpup)

 

[uss2defiant]

bump.

I'm planning to order a minimum pack of 10 rivet nuts that will work with M10x1.5 bolts from mcmaster-carr.

It has knurls around it to resist spin. These are round ones, not the hex rivet nuts.

I'll also be ordering the 10.9 grade m10x1.5 bolts with 35mm length.

I just need to use 2 of each item.



Let me know!

 

[uss2defiant]

I have extras if anyone need them.

Updated info:

M10 × 1.5—Head: Wd. 15 mm, Ht. 10.4 mm
Product Detail
Class 10.9 Steel Flange Head Cap Screw, M10 Thread, 1.5mm Pitch, 35mm Long, Fully Threaded
McMaster-Carr


Product Detail
Zinc-Plated Steel Heavy-Duty Rivet Nut, Open End, M10x1.50 Interior Thread, .7-3.8mm Material Thickness
McMaster-Carr