Replacing Wiring Harness Help

[2006Renegade]

Hi. My 2006 Renegade has been sitting for a couple years and some wiring under the hood has been chewed on. I don't think I need to buy an entire wiring harness as this is the only part where the circuit has been broken (see pictures).

There is an '03 Liberty Sport at a local scrapyard. Would this section of the wiring harness on the 2003 Sport fit in my 2006 Renegade?

 

[uss2defiant]

sounds like you're down in tucson.

You can always just splice them together.

 

[2006Renegade]

I believe the wires are chewed too closely to the male and female connectors in some places to splice them

 

[uss2defiant]

if it has the same number of pins and the connector is the same you could do it. just make sure match the wires accordingly.

The wiring diagram can be found in the FSM
Index of /manuals/Jeep/KJ

 

[2006Renegade]

Unfortunately the number of wires on the connector was different and the pins didn't line up. I was able to splice most of the wires and solder the ones that were chewed too much to be spliced and got the Jeep running. Thanks for the help!