Receipe for 3" of KJ lift? (Paging Dr. Mudd)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

twowings

Full Access Member
Joined
Nov 23, 2014
Messages
802
Reaction score
3
Location
Tulsa, OK
Lift Kit Components

If one were to purchase the following items:

KJ Ironman 1.5" spring lift kit HD
SKU: 12711GR 12712GR JEEP014C JEEP015B with JBA Upper Control Arms for Lifted KJ

JBA Strut Spacer Plate Set
SKU: SSP025-KJ

KJ Rear upper coil spring isolator
SKU: 52088707AA

TeraFlex Bump Stop
SKU: TER1903200

Y Link Extension fits 2.5" - 4" lifts

SKU: JBA-LEX4

Four Official NHL St. Louis Blues Hockey Team Hockey Pucks

Would one end up with about 2.75" of lift and be able to run 245/75R/16s ?

OR

Would one's KJ explode in flames ?

Thanks in advance !
 
Last edited:

John3seventeen

Full Access Member
Joined
Jul 20, 2013
Messages
1,323
Reaction score
1
Location
WV Panhandle
A
If one were to purchase the following items:

KJ Ironman 1.5" spring lift kit HD
SKU: 12711GR 12712GR JEEP014C JEEP015B with JBA Upper Control Arms for Lifted KJ

JBA Strut Spacer Plate Set
SKU: SSP025-KJ

KJ Rear upper coil spring isolator
SKU: 52088707AA

TeraFlex Bump Stop
SKU: TER1903200

Y Link Extension fits 2.5" - 4" lifts
SKU: JBA-LEX4

Would one end up with about 2.75" of lift and be able to run 245/75R/16s ?

OR

Would one's KJ explode in flames ?

Thanks in advance !

While your waiting on the Doc

The answer is Yes & No
 
Last edited:

nullptr

Full Access Member
Joined
Jan 18, 2015
Messages
344
Reaction score
0
Location
Port Orange, FL
Well, it's going to depend on if he has a trailer hitch or not, isn't it? If he doesn't, then "yes and yes", if he does, then "yes and no". :icon_lol:
 

twowings

Full Access Member
Joined
Nov 23, 2014
Messages
802
Reaction score
3
Location
Tulsa, OK
Any and all opinions welcomed before I melt down my credit card...I'm retiring at the end of the month so I'll have a great deal more of free time for installation but I'd like to make sure I order correctly...
 

wheeee32

Full Access Member
Joined
Feb 27, 2009
Messages
1,349
Reaction score
14
Location
Not the mountains.
Just call me pucks bc I seem to be the one to chime in most of the time to not forget about them:icon_lol: Since you'll everything torn apart, go ahead and install two hockey pucks per side in the rear for your lower bump stops. Do a quick search and you'll find a thread or two explaining how to do it along with pictures.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
If one were to purchase the following items:

KJ Ironman 1.5" spring lift kit HD
SKU: 12711GR 12712GR JEEP014C JEEP015B with JBA Upper Control Arms for Lifted KJ

JBA Strut Spacer Plate Set
SKU: SSP025-KJ

KJ Rear upper coil spring isolator
SKU: 52088707AA

TeraFlex Bump Stop
SKU: TER1903200

Y Link Extension fits 2.5" - 4" lifts

SKU: JBA-LEX4

Four Official NHL St. Louis Blues Hockey Team Hockey Pucks

Would one end up with about 2.75" of lift and be able to run 245/75R/16s ?

OR

Would one's KJ explode in flames ?

Thanks in advance !

At 2.75 inches of lift wouldn't " need" to have the Y link extension but would help somewhat.
pound over the pinch weld if running 245-75-16s and just that amount of lift

Sorry been enjoying the land of no cell service, no internet, and doing things on the farm
 

Members online

No members online now.
Top