on going front end battle!

[NJallDAY]

So i changed my passenger hub bearing on sat. It started off making noise only while turning left and progressed to a constant noise. Once it was changed the hub was silent, until today.... every once in a while while turning left i can here the hub. The odds of me purchasing a bad hub seem prettly slim. So is there any other reason to cause a hub to go bad? Or maybe the noise is coming from something else? At my witts end on this one so i need some help. Thanks, NJ

 

[4x4kayak2112]

If yours is 4wd id say check your front cv joint, mine on my old car did that.

Sent from my Home Phone using Tapatalk 2

 

[yellocoyote]

Check the passenger side CV where it meets with the intermediate shaft.

 

[NJallDAY]

I shall do that. Thanks

 

[TwoBobsKJ]

Check the passenger side CV where it meets with the intermediate shaft.

X2

Also could be the intermediate shaft itself. Replaced mine last week along with a remanned CV from NAPA. The splines on the end of the shaft were in bad shape - pretty rusted and worn.

Bob

 

[NJallDAY]

Im pretty sure its the cv. The lbj boot is torn too so i might as well do it all at once