MSD Ignition

[Cetismish]

I have an '04 Liberty Limited 2WD. At the moment it is stock, but I have several upgrades in the pipeline. (exhaust, intake, fuel system, headers, suspension, etc.)

I have been trying to figure out which MSD controller would work best for this application. Any suggestions?

 

[tjkj2002]

They don't make anything that would work on a KJ.

 

[Cetismish]

Boo! Thanks for the info... explains why I can't find anything online

 

[wheeee32]

If you're looking to spend money on go fast mods, the KJ isn't a good platform to go with.

 

[04Liberty]

Your stock coils are plenty for the application. Accel and MSD make aftermarket coil upgrades for the hemis (not worth the cost IMO) but not for the 3.7/4.7 family. Pretty much a forgotten engine.

 

[JasonJ]

Of the 5 areas that you said you want to upgrade, really only one of them is worth it. Suspension.

The stock ignition coils will do just fine. The only time I found it necessary to upgrade any ignition system was when I put a turbocharger on my 94 Ford Escort (using the factory turbo from the '84 Escort GT 1.6). I installed an MSD coil pack and wires, and good copper plugs.