KJ Blend door actuator and AC light ??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

billyoungm

New Member
Joined
Aug 20, 2019
Messages
11
Reaction score
2
I have a 2006 Liberty CRD that won't **** hot or cold. I believe the blend door actuator needs replaced.... ?
Also the little light on the AC button does not light.
Does anyone have some good instructions on dash removal - or better yet some shortcuts? better diagnostics would help me too. any tips are appreciated.
 

DadOSix

Full Access Member
Joined
May 20, 2020
Messages
672
Reaction score
359
Location
Cumberland, MD.
search up a heater core / evap core r&r thread on here.

It is not hard - but it is time consuming.

before tearing into it, why not check both systems.

i know this sounds childish but - is the heater core even connected? If this is a new to you jeep, many temporarily shunted the coolant path to delay putting in a new heater core. Look under the hood and see. It is on the right side of the truck - in under the coolant tank.

does the fan in the cabin run?

post up some details of how far you have gone so as to not waste your time.
 
Top