Search results

  1. B

    Looking for this part turn signal assembly

    I need this small piece that is for passenger side turn signal assembly. The piece that I am holding my hand in my hands screws in to it.Mine is an '07.
  2. B

    stubborn AC valve core

    I had my AC compressor replaced a couple weeks a go. I can not add any refrigerant because the valve core was bent and would not make a connection allowing the refrigerant to enter. I have tried removing the core several times but no luck. I have used needle nose(yes I was able to fit them...
  3. B

    Is this area safe to drill?

    Just want to make sure I am ok to put some self tapping screws here... I need some grounding points for my offroad lights.Yes,I know that I need to sand away the paint to make a good connection.
  4. B

    Roof rack is leaving stains on my 07

    Ever since I installed a roof rack,I get these ugly brown spots and streaks on my Jeep,after every rain and than for 2 or 3 days after.I'll wipe them off and than the next day,when I get home,there they are again. I used the rubber caps that came with the rack to cover any openings.Since some of...
  5. B

    cutting bumper to install grill guard

    Has any one had to cut out the sections in front bumper where tow hooks might be,in order to put on a grill guard?
  6. B

    the firewall rubber grommet..I think this is it?

    Just want to make sure this is it before I do any drilling....
  7. B

    Working on windshield washer..which hose?

    Mine was damaged due to a collision that took place before I owned the Jeep. A mechanic told me that a piece is missing. I can't remember what part he said or what the part does. Here is how mine looks from underneath. The mechanic also said that even if the missing part was...
  8. B

    Help needed putting in windshield washer

    Mine was damaged due to a collision that took place before I owned the Jeep. A mechanic told me that a piece is missing. I can't remember what part he said or what the part does. Here is how mine looks from underneath. The mechanic also said that even if the missing part was...
  9. B

    black and orange 07 KJ

    I bought my KJ about 2 years a go. I have uploaded clips so far,showing all the work I have done on it. I am currently working on a part 4. I am waiting on the local body shop to give me an estimate on having the front cross member replaced. Once that is done,I can finally get my grill guard...
  10. B

    replace gear shift indicator light in 07 Liberty

    I attempted to do this yesterday,but did not get very far.. I did not completely remove it,since there is wiring underneath. Where the tip of the knife blade is,i tried I think is a clip that holds the PRND piece.There is also one on the opposite side.I tried to loosen it but was unsure...
  11. B

    removing front crossmember

    I had damage to my front crossmember and want to replace the part so I can get around to installing my grill guard I am thinking of pulling the part from one at the local pick n pull How difficult is it?Am I going to need to saw through anything?
  12. B

    OEM roof lights hardware

    The local 4x4 parts place gave me an estimate of over $600 to install the lights. So I am going to do it myself. I need to know the size of screws,nuts,bolts,rivets,washers,whatever needed...?
  13. B

    About to install Aires 1047 grill guard

    But before I do,I am still a little unclear on what goes wear. The instructions say; 1.Factory tow hooks must be removed(if equipped)to install the front bar assembly 2.Start with the passenger side.Look through the opening in the bumper and locate the holes in the bottom of the steel bumper...
  14. B

    OEM roof light wiring ..anything missing?

    The guy I bought it from said he cut the black wire because he did not want pay for the switch too. I plan on buying an OEM switch/relay and solder it to what is shown here. Speaking of the switch and relay,is it just too much trouble to replace it with a different one?I obviously don't want to...
  15. B

    OEM light bar;I need switch and mounting brackets,anything else?

    I found a OEM light bar on Craigs List a couple of days a go. Picked it up today. At 50 bucks,it was too good of a deal to pass up. The guy I bought it from said that he got it from a salvage yard. Don't know what he paid for it but I guess he didn't want to pay more,since he cut the wire that...
  16. B

    fog light door on 07..?

    I had hoped that the reason my fog lights don't work is because the fuse was missing. I put in a new fuse and fiddled with the control multi function control lever.Nothing. The fog light indicator light does come on. So the next step in this is checking to see if the bulbs are burned out or...
  17. B

    question regarding nerf bar installation

    I am am confused about which of the holes pictured do the front mounting brackets connect to? The pic shown is the driver side front. Instructions say to insert 2 bolt plates through large holes so that they protrude through smaller holes adjacent. Front Driver (2) by bladerunner555 posted...
  18. B

    My black and orange 2007 KJ part 2

  19. B

    My black and orange 2007 KJ part 1

  20. B

    wrapping/dipping interior,exterior.Can't be done..?

    I talked with the owner of a place here in town,that does customizing of Jeeps. I told him that I wanted some of the interior and exterior of my 2007 to be wrapped.He said that it's not possible due to the texture of the plastic. Is he right?

Random media

20131007 164624
found on http://www.kjitalia.com forums
first deep trail ride
Parked on a snow mound. Because I can.
IMG 20130309 134303 025
Comayagua, Honduras
Empty Every pocket
1st Camping Trip
20140326 142715

Latest posts

Members online

Total: 604 (members: 2, guests: 602)
Top