Search results

  1. G

    Front rotors - hard to replace?

    Noticed yesterday there was a grinding sound from the front when braking, peeked in at the pads and outside pads show lots of wear left, could not see inside easily but notice that the inside of the rotors have wore very unevenly while the outside of rotors are smooth. Will pop the wheels...
  2. G

    Replacement lights for overhead light bar (& other questions)

    Been ages since I've been on this board but a quick search on this didn't bring much so: A couple of the (4) lights on the overhead light bar on my KJ are cracked/broken. If I'm going to be replacing them I was wondering if others on the board here have found better lights than the factory...
  3. G

    #4 speed was gone in fan, now all are.. still resistor block?

    Thanks - it's an 04..
  4. G

    #4 speed was gone in fan, now all are.. still resistor block?

    :3681700093_1f8b56e8 I posted this at the end of the howto thread as well, but I don't think it gets read as much.. Anyway, when I bought the Liberty a couple of years ago, I noticed that the #1 speed either didn't work or was so low it wasn't audible over road noise etc. At the time someone...
  5. G

    HOW TO: Replace the Blower Control Resistor Block

    On my 04 I don't believe #1 ever worked, unless it's real slow and I just couldn't hear it. However, I have been driving it more lately (usually the wife's ride) and noticed that #4 was not working, but #2 and #3 speeds were. But now I have nothing on any of them.. I thought #4 would work no...
  6. G

    Updates..

    The other forum I frequent for Ford Diesels has a lot of FAQ's, along with tutorials for things like changing tranny fluid etc. I find that feature very valuable and use it often.
  7. G

    engine light just came on

    Disconnected the batt for 1/2 hour or so, light cleared and has not come back on yet. Gas cap seemed fine when I took it in to fill up. I ran the tank right down though, probably the first time that's been done since we bought it a year ago, my better 1/2 never lets it get lower than 1/4 tank...
  8. G

    engine light just came on

    Will do - thanks for the replies. Should the light not come off, is this a serious enough problem that my wife should not take it on a longish trip tomorrow?
  9. G

    engine light just came on

    p0441
  10. G

    engine light just came on

    My wife's 05 KJ just had the engine light come on. I've searched this a bit, and haven't tried some of solutions (battery disconnect, cycle key etc) yet, but will tomorrow. I changed the oil not long ago, but am running it past the recommended interval because I run synthetic. Is there some...
  11. G

    rear brake pads, do I have the anti-rattle clip?

    thanks guys, picked them up yesterday $74.99 at Canadian Tire, $119 for generic pads here where I live. Weird, almost double the price I pay for pads for my Super Duty Diesel..
  12. G

    rear brake pads, do I have the anti-rattle clip?

    ok, thanks, I think I'll just get them with the clips, if I have them I'll use them, if not I won't.
  13. G

    rear brake pads, do I have the anti-rattle clip?

    As far as I know the monroe pads are good ceramic pads, and neither of the local stores (one is NAPA) in my town don't carry them but they are 60%+ higher price than I can get them in the city for. As for my original question, is there any way to tell by model or serial # etc. if my unit...
  14. G

    rear brake pads, do I have the anti-rattle clip?

    Just calling around to find a good price on rear pads, and I find out that monroe pads come with or without the anti rattle clip, but the Nascar pads don't. I have no idea if my 04/V6 KJ has them or not, being an optioned out model I will assume it does. I am also assuming that the pads...
  15. G

    Hi Beam relay question on 04 KJ

    Curious about this, I pulled my fuse panel off yesterday to replace the power point (lighter) fuse, and I noticed the hi beam relay plug has nothing in it. Since this is a Canadian unit I have the daytime running lights standard, should there or should there not be a relay in this plug?
  16. G

    Has anyone replaced the overhead light switch with a 3-way so they work with hi beams

    Are yours wired like that from the factory? I assume when you switch to low beam then they go off? I checked ours the other night and they are controlled from the switch only, and don't care what beam the headlights are on.
  17. G

    Has anyone replaced the overhead light switch with a 3-way so they work with hi beams

    I was just thinking about this while reading another thread about auxiliary driving lights. Years ago a buddy of mine put some Lucas "flamethrowers" on his car, and wired them in with a 3-way rocker switch in such a way that in one of the "on" positions they would only come on with the high...
  18. G

    Brush Guard and Lights, Installed....

    ok, thanks for that!
  19. G

    Brush Guard and Lights, Installed....

    thanks! I'll check it out.., unfortunately it looks like he only ships stateside.. :-( I thought the one in the link I posted looked like the same make tho..
  20. G

    Brush Guard and Lights, Installed....

    By any chance is this the same as this unit?

Random media

Just tested the 4x4 by climbing a small rock
77A6C3B5-5CB6-4C4B-8E19-CAFE1AA4AE01
1069288 10153043819925597 1034090480 n
Shiny
2006 jeep kj rear
224.jpg
jeep tree3
Maryland KJ vs. F-250 pickup (looks like the Jeep won)
226.jpg

Latest posts

Members online

Total: 344 (members: 3, guests: 341)
Top