Murray
New Member
Has anyone relocated the windshield washer solvent bottle. Ifso
Where did you put it and how much truble was it.
Where did you put it and how much truble was it.
Relocate washer bottle
- Thread starter Murray
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
jeepkj02
Full Access Member
Pretty simple job. Just a matter of extending the wiring.
You must be registered for see images attach
501
Full Access Member
Where did you get the new water bottle & mounting bracket at?
tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 39
Those bottles are just 1.5qt coolant overflow bottles found at most autoparts stores(comes with brackets).Just need to drill a hole for the pump,extend the wiring.I've had the same setup for about 3 years now,works great.
501
Full Access Member
Thanks tjkj
Murray
New Member
Where did you drill the hole for the pump. Sorry for the questions i'mok at taking parts off and putting them back on but doing something new like this i like to find out everything before attempting it.
I was out wheeling on Boxing day with the Jeep Club here and fell through the ice in a big water /ice hole .A piece of ice went through the little flap on the inside of the wheelwell and hit the bottle breaking off the part that the two hoses connect too.
KJ04
Full Access Member
Just position the new bottle where you want to put it and just eyeball the the location on the lower side to drill your holes for the pump and level sensor. The hose will be long enough to reach, but you will have to add about 16" of wire. Use some rtv to seal around the holes.
Murray
New Member
Thanks for your help guys. Im going to see if i can find a tank tomorrow . A junk yard may have one that i can just bolt up and have mounting places for hose and pump and senser
67Customs
Full Access Member
Just wondering, what is the reasoning behind relocating the washer bottle on a KJ?
to get it out of a stupid location in front of the wheel, or when installing a aftermaket bumper, cutting the stock bumpers etc ARB have an extra wing that covers the bottle to some degree
67Customs
Full Access Member
Thanks. I'm in an inquiring mood today.
Murray
New Member
Went to look at it todat and found that it was the pump broken where the part sticks out and the hoses hook up to. so i just put a pump in today . Relocating the bottle will be when it warms up.
Thanks for the info guys
Thanks for the info guys
Similar threads
Latest posts
-
-
Rear windshield on 06' Liberty won't close and lock in most of the time.
- Latest: cruisingram2000
-