Trans fluid drain and refill...

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Burro II

Member
Joined
Mar 2, 2019
Messages
65
Reaction score
3
Location
Sierra Foothills CA
I'm putting in a large parts order for the 06 Lib with 3.7 and auto. Included on the list are trans filter, gasket, and fluid.

Question: How much fluid is typically needed when just dropping the pan and changing the filter?

(ATF +4 type of course. I guess that's religion around here)
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,099
Reaction score
1,766
Location
B.C. Canada
FSM also agrees with post #2 ^ at 4 Quarts..
You must be registered for see images attach

It is good to have an extra quart on hand, as bringing it to the full line on dipstick, may require a bit more.

* If you have a 42RLE PML aluminum pan, 1.25 more quarts is required.
 
Last edited:
Top