kj924
Administrator
That bottom cleavis bolt is not that hard to get back in place. Just diconnect the ubj, cleavis bolts top and bottom, and the sway bar. Pry donw on the lower control arm and take the lower cleavis bolt out. When you go to re-install that bolt just pry down on the lca and shove the cleavis towards the engine bay and let up ever so slightly on the lower control arm and there it is. It's not as hard as some make it on here. Jeez, I've seen guys with ratchet straps and such pulling the cleavis into place. I did it by myself in the driveway with no help other than a 2 1/2 foot piece of 2x4.
