Reverse not engaging

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Damotee

Full Access Member
Joined
May 29, 2016
Messages
199
Reaction score
1
Location
Cape York, Australia
Hi all, so this morning ive gone to drive the Jeep. Put it in reverse and nothing happened. I put it back in Park then back to reverse and again it didn't move. I gave it some revs and then I heard a Clunk noise and reverse engaged. Any ideas whats going on? Cheers.
 

JeepinJarhead03

Full Access Member
Joined
Sep 17, 2009
Messages
387
Reaction score
16
Location
Petersburg VA
1. when was it's last service and what is the current fluid level

2. does it also do this behavior once the transmission has warmed up



i have a bad suspicion im going to put here incase i forget to check back to the thread after the other guys help with further diagnosis

involves a 3 dollar o-ring and a 25 cent snap ring on the L/R accumulator

part #'s #04431617AB and #06501695, between those and the transgo sk604 kit my suspicion would be resolved - but let's not jump to such suspicions like that yet

luckily, it's not a overly drastic task if necessary
 
Last edited:
Top