Rear window doesn't roll down.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

LucasD

New Member
Joined
Jan 26, 2024
Messages
9
Reaction score
8
My back window hasn't worked since I've had my jeep. It slowly lowers itself as i drive. I took the door panel off and this was just sticking out inside the window area. Do I need to attach it to something or is it broken off?
You must be registered for see images attach
 

DadOSix

Well-Known Member
KJ Supporting Member
Joined
May 20, 2020
Messages
928
Reaction score
553
Location
Cumberland, MD.
There is a nylon (plastic) clip that is riding in the track of the window regulator. It’ll still be there , but there is a threaded section of that same clip that has broken or disintegrated.

Jeep Liberty 2002 2006 Window Regulator Repair Kit Clip Rear Left - Right CS73 - sorry - i can;t make the picture load tonite.
 

Him73067

New Member
Joined
Apr 9, 2015
Messages
14
Reaction score
7
Location
Georgia
It is a bit tricky to remove and replace, but definitely replace the regulator. I have had good luck with a NAPA replacement. YMMV.
 

BigMopar440

New Member
Joined
Mar 3, 2016
Messages
19
Reaction score
10
Location
Pueblo, Co
Also, some manufacturers have a new design for these and may not use the style that was OEM. So it may not have the part that you are holding in the pic.
 

NevMcGyver

New Member
Joined
Nov 20, 2013
Messages
4
Reaction score
8
Location
Uitenhage, Eastern Cape, South Africa
There is a nylon (plastic) clip that is riding in the track of the window regulator. It’ll still be there , but there is a threaded section of that same clip that has broken or disintegrated.

Jeep Liberty 2002 2006 Window Regulator Repair Kit Clip Rear Left - Right CS73 - sorry - i can;t make the picture load tonite.
I'm in full agreement here. That threaded section shears off. I had one of my windows do that... but obtaining a replacement part was hellish expensive here in SA. So, I did what I love to do... I made a plan and repaired it.
The repair took some time but was worth the effort.
It entailed finding a useable gauge of strong wire, and then by means of drilling appropriate holes, and threading the wire accordingly, then also forming the wire so that it does not seize against the guides.
Now I have a fully functioning window.

Sorry, can't send pics, as I'd have to open the door again to do so.
 

Latest posts

Members online

Top