Re-Gearing.

[MarkMatters]

Well, I've been searching for this topic... going to 4.10. I find a bunch of links but what I really want to know is..every single part needed to achieve this. I did a search on ebay....am i looking at the correct thing? if it's the right part, what else is needed? thanks!


http://i12.ebayimg.com/02/i/000/db/2a/1574_12.JPG

http://cgi.ebay.com/ebaymotors/86-9...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Back-n-Black]

The rear 8.25 gears are common and can be found lots of places. The front however not many people carry. This is one of the best threads i have seen for the D30a gears. This thread talks about all the parts needed and what to buy. Read.

http://lostkjs.com/forum/phpBB2/viewtopic.php?t=39080

 

[tjkj2002]

Well, I've been searching for this topic... going to 4.10. I find a bunch of links but what I really want to know is..every single part needed to achieve this. I did a search on ebay....am i looking at the correct thing? if it's the right part, what else is needed? thanks!


http://i12.ebayimg.com/02/i/000/db/2a/1574_12.JPG

http://cgi.ebay.com/ebaymotors/86-9...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Those links are for D30 gears.The KJ uses a D30A which uses a longer pinion shaft then the D30's,only Dana/Spicer makes the 4.10's for the D30A.