Needing to replace lifted struts and springs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

deliciousdaly

Full Access Member
Joined
Apr 14, 2008
Messages
118
Reaction score
1
Location
Fort Myers Florida
I've been battling with my front end making noises, I have tried everything but replacing the front springs and struts. I bought the rusty's set years ago and just replaced the rear shocks with Durango shocks and left the springs. I don't want to redo anything on the back of the jeep so what do I buy to replace the front with while keeping my 2.5 inch lift?
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
To start measure where you are middle of the wheel to bottom of the flare
Then that way we can determine how much lift you actually need to match the rear.
But OME springs and shocks or Bilsteins as well
also Ironman little cheaper but ride I think about the same as OMEs do
But first measure, let us know if you want the front the same height, little higher or ???? and we'll go from there :icon_lol:
 
Top