need help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

possumshole

New Member
Joined
Dec 24, 2012
Messages
8
Reaction score
0
Location
gastoina nc
i have a 04 kj that ran hot due a cracked radiator then the water pump went then the head gaskets i changed everthing i am still having over heating issues i crack the the plug on top of the engine and let it run it till i don't see any air bubbles to bleed the air out i checked the comperssion it was good all the way around i need some help i am no sure what to do now
 

NJallDAY

Full Access Member
Joined
Sep 11, 2012
Messages
717
Reaction score
2
Location
New Jersey
Have you flushed the coolant system? Maybe its gunked up and not allowing proper coolant flow.
 

possumshole

New Member
Joined
Dec 24, 2012
Messages
8
Reaction score
0
Location
gastoina nc
flushed the coolant system nothing is gunked up is their a special way to bleed the air out that i don't know of
 

belvedere

Full Access Member
Joined
Oct 23, 2008
Messages
551
Reaction score
10
Location
SD
When you had the heads off, were they checked for cracks and warpage at a machine shop?
 

possumshole

New Member
Joined
Dec 24, 2012
Messages
8
Reaction score
0
Location
gastoina nc
yup they where checked by a machine shop but i figure out that the fan wasn't working at low speed just high speed so i am waiting on the fan motor now thanks for the help
 
Top