Need help CKP!!!!

[sailor422]

So thought my ****** was going turns out it was a bad crankshaft position sensor. Thank god or so i thought. I tried to get to out and twisted gentle and bam broke right off. Now im in hour 4 of trying to get it out and am out of ideas. I really need help. I am beyond frustrated. anything will be helpful.

Thanks in advance,
matt

 

[steveo126]

http://www.jeepkj.com/forum/showthread.php?t=32731

the connectors are kind of a pain because, at least on my kj, the locking mechanism is brittle plastic and ive broken two on my fuel injector harness.

 

[sailor422]

So after much thought and only one response thanks steveo i took matters into my own hands after the piece broke off. i went up to my local ace hardware got a 3/16x12 inch long drill bit which fit perfectly at an angle and allowed me to drill into the remaining piece and weaken it. It is very hard to reach because of the exhaust pipe coming from the block. After about 3 holes I started to get more and more play out of it and eventually got it out no problem. Just be aware of whats on the other side and do not try to go all the way through.