KJ Liberty tire size upgrade

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mac070

New Member
Joined
Mar 12, 2025
Messages
2
Reaction score
3
Hello I currently have a 2004 Liberty. Have OME 2948 for the rear and 2927 OME springs for the front. Haven't tossed them on yet because my tires are super tiny.
Current size : 215/70/16

What tire size should I run? Will 245/70/16 look too small with OME lift ? Post pictures !!! Thanks in advance.
 

Attachments

  • IMG_20250526_145227288.jpg
    IMG_20250526_145227288.jpg
    695.9 KB · Views: 12

Luke

Interloper
Joined
Oct 21, 2008
Messages
4,278
Reaction score
820
Location
Bancroft, Canada
245/75 for reference… you will need to deal with the pinch weld and do a little creative trimming of the plastic in front.

You must be registered for see images attach
 
Last edited:

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,645
Reaction score
3,002
Location
Philadelphia, PA
You must be registered for see images attach


You must be registered for see images attach


KK the same. 245/75R16.
 

allengerdes

New Member
Joined
Dec 27, 2024
Messages
5
Reaction score
13
Went with 245/70/17 tires for mine. I have the same OME setup and didn’t have to do any trimming or pounding of the pinch weld.
You must be registered for see images attach
You must be registered for see images attach
 

JMichael2006

Member
Joined
Oct 11, 2021
Messages
44
Reaction score
53
I modified the bumper and pinch weld and went with 245/75-18's! I took out the plastic wells and washer bottle. Drove it on Elephant Hill Trail at Moab during EJS! Everyone was impressed. Hemi Wranglers were digging holes and I just eased on up!!
 

seafish

Full Access Member
Joined
Jan 10, 2024
Messages
356
Reaction score
498
Went with 245/70/17 tires for mine. I have the same OME setup and didn’t have to do any trimming or pounding of the pinch weld.
You must be registered for see images attach
You must be registered for see images attach
NEVER seen it before and LOVE the classic Woody look with the black paint… is that an original paint option or something you did custom?

Either way, GREAT looking Libby !!!!
 

DefCon2

New Member
Joined
Jan 30, 2025
Messages
18
Reaction score
6
I modified the bumper and pinch weld and went with 245/75-18's! I took out the plastic wells and washer bottle. Drove it on Elephant Hill Trail at Moab during EJS! Everyone was impressed. Hemi Wranglers were digging holes and I just eased on up!!
How much lift do you have? You're essentially running 33s, so...
 

JMichael2006

Member
Joined
Oct 11, 2021
Messages
44
Reaction score
53
How much lift do you have? You're essentially running 33s, so...
2.5" Skyjacker front and rear. The tires measure out at 31.5" tall. I am using an Ironrock rear K member. It made a huge difference in ride over the stock unit.
 

DefCon2

New Member
Joined
Jan 30, 2025
Messages
18
Reaction score
6
Ok, that makes sense. The tire calculator had your diameter at 32.5, which is the diameter as nominal 33s.
 
Top